we will tonytony.mon wrote:I'm in for a set as well.
I still have my Benny Hedges special carb adjuster tool, made from a bit of 90 degree bent copper tube, a length of clutch cable from something or other and a couple of spade terminals- works fine!
If anyone notices that they're after the money being sent over on SH forum, post it up on here, pls.
I seldom get time to check out that forum.
Fuel thumb mixture screws UPDATED
Moderator: VTRDark
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Fuel thumb mixture screws
Re: Fuel thumb mixture screws
i want a set aswel cov entry boylloydie wrote:we will tonytony.mon wrote:I'm in for a set as well.
I still have my Benny Hedges special carb adjuster tool, made from a bit of 90 degree bent copper tube, a length of clutch cable from something or other and a couple of spade terminals- works fine!
If anyone notices that they're after the money being sent over on SH forum, post it up on here, pls.
I seldom get time to check out that forum.
told you not to but oh no you knew better
Re: Fuel thumb mixture screws
AL, at this rate you might need a bigger smuggling suitcase.
Is the false bottom big enough for a full system?
Is the false bottom big enough for a full system?
It's not falling off, it's an upgrade opportunity.
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Fuel thumb mixture screws
thats ten sets now then i will pass it onmacdee wrote:i want a set aswel cov entry boylloydie wrote:we will tonytony.mon wrote:I'm in for a set as well.
I still have my Benny Hedges special carb adjuster tool, made from a bit of 90 degree bent copper tube, a length of clutch cable from something or other and a couple of spade terminals- works fine!
If anyone notices that they're after the money being sent over on SH forum, post it up on here, pls.
I seldom get time to check out that forum.
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Fuel thumb mixture screws
if you want a set please pm jack flash on the superhawk forum he is now taking orders .
http://www.superhawkforum.com/forums/mo ... rew-31449/
if your not a member im happy to pass on info for you just pm me .
http://www.superhawkforum.com/forums/mo ... rew-31449/
if your not a member im happy to pass on info for you just pm me .
Re: Fuel thumb mixture screws UPDATED
Message sent happy for them to come via the Detroit route
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Fuel thumb mixture screws UPDATED
Just got an email from jack asking for amcq' Detroit address .
I'm happy for mine to be sent there (thanks amcq) and is jack .as one package is better than 8 .
So if you guys are happy for amcq to bring them back the next time he's state side that's great but you can get them shipped direct and get charged customs and shipping if you want .
I'm happy for mine to be sent there (thanks amcq) and is jack .as one package is better than 8 .
So if you guys are happy for amcq to bring them back the next time he's state side that's great but you can get them shipped direct and get charged customs and shipping if you want .
Re: Fuel thumb mixture screws
Anytime Lloydie, always thinking about my brothers across the pondlloydie wrote:thanks for the ideaNHSH wrote:Lloydie, you are quick mate just mentioned that couple hour ago ;-)
You never see a motorcycle parked in front of a psychiatrists for psycho therapy. All I need is cycle therapy
Re: Fuel thumb mixture screws UPDATED
I have sent Jack the prostal address he can use for this. is everyone happy to wait till I can collect, but you will save shipping and tax?lloydie wrote:Just got an email from jack asking for amcq' Detroit address .
I'm happy for mine to be sent there (thanks amcq) and is jack .as one package is better than 8 .
So if you guys are happy for amcq to bring them back the next time he's state side that's great but you can get them shipped direct and get charged customs and shipping if you want .
AMcQ
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Fuel thumb mixture screws UPDATED
I am thank you amcq
Re: Fuel thumb mixture screws UPDATED
Me too AMCQ Mine is off the road for a fair while yet.
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Fuel thumb mixture screws UPDATED
i've pm'd jack, i'm waiting for a reply, muchos gracias al i'd like to take you up on your offer........
i've been trying to contact the cyberman about these mixture screws, but to no avail...
i've been trying to contact the cyberman about these mixture screws, but to no avail...
HEY YOU GUYS!!!!!!
Re: Fuel thumb mixture screws UPDATED
I'm not a member of the superhawk forum, can you tell me what the thumb screws work out at in gbp please?
Thanks for instigating lloydie and for offering to smuggle AMCQ
Thanks for instigating lloydie and for offering to smuggle AMCQ
Jamie
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Fuel thumb mixture screws UPDATED
shipped direct £22 ish + taxesJamoi wrote:I'm not a member of the superhawk forum, can you tell me what the thumb screws work out at in gbp please?
Thanks for instigating lloydie and for offering to smuggle AMCQ
amcq transport £18.50 ish + uk postage
exchange rates change all the time so will the cost .
Last edited by lloydie on Tue Dec 10, 2013 8:12 pm, edited 1 time in total.
Re: Fuel thumb mixture screws UPDATED
Cheers mate
I'm still in, shall I join and ask for a set?
I'm still in, shall I join and ask for a set?
Jamie