Same here :-(Jamoi wrote:I'm in no position to disagree with that.mattycoops43 wrote:Maybe you're just rubbish at it?![]()
lloydie's vtr (kermit)
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: lloydie's vtr (kermit)
Re: lloydie's vtr (kermit)


Noting like admitting guilt ay
(:-})
==============================Enter the Darkside
Re: lloydie's vtr (kermit)
I prefer older look, one of the best looking bikes. White mori belly pan makes things "heavier".




- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: lloydie's vtr (kermit)
lloydie wrote:Same here :-(Jamoi wrote:I'm in no position to disagree with that.mattycoops43 wrote:Maybe you're just rubbish at it?![]()
my rim tapes are only the short Red bits so easily done with your finger, I've had comments on those skills before



missing the noise, not the vibes. However never say never!
Re: lloydie's vtr (kermit)


Chris.
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: lloydie's vtr (kermit)
How it's @at the moment



Ohlins shock
929 front end
Armstrong discs
Adjustable bars
Black belly pan
Quill titanium cans



Ohlins shock
929 front end
Armstrong discs
Adjustable bars
Black belly pan
Quill titanium cans
- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: lloydie's vtr (kermit)
its a great bike, but needs the white wheels and white pan back on!!!
missing the noise, not the vibes. However never say never!
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: lloydie's vtr (kermit)
They will be back on don't worrybigtwinthing wrote:its a great bike, but needs the white wheels and white pan back on!!!

- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: lloydie's vtr (kermit)
i like it cause its different, I've decided i am going to hack my seat unit up so that its a single seater etc, but have to get settled in the Bungalow first, it will give me something to do over Winter, your wise words and wisdom may be called upon!!! 

missing the noise, not the vibes. However never say never!
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: lloydie's vtr (kermit)

- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: lloydie's vtr (kermit)
i wont want to change it back, but i may fook it up so i may get a spares set to practice on!!!, this bikes gonna be my last road bike so i want it a bit different too.lloydie wrote:I will advise you get a spare seat unit to do it on and keep yours good for when you want to change it back
missing the noise, not the vibes. However never say never!
Re: lloydie's vtr (kermit)
Looking good Lloydie
I haven't seen Jota style bars like that for years, I never knew you could still get them.
I don't suppose it's flex in those bars (at the joints) that's causing your front end wobble
Oh Matron
Chris.

I haven't seen Jota style bars like that for years, I never knew you could still get them.
I don't suppose it's flex in those bars (at the joints) that's causing your front end wobble


Chris.
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: lloydie's vtr (kermit)
Well I found the problem !! Ever so slightly loose head bearings .
I went out for well as thumper says a end of a bell ride , had the front up the rear up really gave it a spanking and it was solid so Alls good now wohoo
I went out for well as thumper says a end of a bell ride , had the front up the rear up really gave it a spanking and it was solid so Alls good now wohoo
Re: lloydie's vtr (kermit)
Well done in finding the problem Lloydie, result
Chris.

Chris.
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: lloydie's vtr (kermit)
It was and how I missed it when I reset the front end I don't know .
Well no more messing with kermit now THATs it ! Bring on piggy
Well no more messing with kermit now THATs it ! Bring on piggy