Alternator cover inspection hole screw

[Geoff S]

Being on the very cutting edge of excellence I didn't tighten up the inspection bolt/screw that covers the smaller of the two holes in the alternator cover properly last time I took it off.

I went out for a bit of a blast last night and it has now parted company with the bike

Anybody got one I can give them some beer tokens for? Haven't found them online but then again my description of the part isn't exactly accurate

[sirch345]

The part you're looking for below is Number 9. If you didn't know, you can click the image below to enlarge it,



Chris.

[Geoff S]

You, sir, are a gentleman!

[Steve6088]

If you havn't ordered one already, I've got one you can have. Just pm my your address.

[agentpineapple]

I also have a spare one mate, let me know if you need it.....

[bigtwinthing]

Jamies glove may have it!!!

[VTRDark]

Check your oil level too as you may have lost some in spray out of the inspection hole without it being capped off

(:-})

[Geoff S]

Thanks gents!

pm on it's way to Mr Pineapple. Hopefully this won't turn out like the also time I bought stuff from you. So many shiny things that I suddenly needed

Will do Carl. It is coming out in a fair spray as obviously I haven't stopped using the bike

[tony.mon]

You can do the small one up fine- it's the big one that you daren't tighten, and needs to be held in with silicon sealer.
My advice is to use an Allen key- use the smaller section to tighten it, and the longer section to undo. Hasn't failed me yet!

[agentpineapple]

Thanks gents!

pm on it's way to Mr Pineapple. Hopefully this won't turn out like the also time I bought stuff from you. So many shiny things that I suddenly needed

luckily for you I was away.......
as I have a few items you might be interested in.....