what have you done to your "bike" today

[lloydie]

There always a little play in the fork bushes and it might be that .
Try holding the front brake on and with your other hand feel the head stock and rock it if you feel it in the head stock it'll be them

[Virt]

not strong enough to lift the front wheel of the ground....

Bike has an engine....

Sent from my GT-I9505 using Tapatalk

[tony.mon]

Today... well, this evening... ground some more fibreglass off the airbox so that the tank has a chance of being able to be bolted down at the usual places...

And got a hole in the right place for the throttle cables- shame it's a fair distance from the holes I drilled in earlier, but I can fibreglass those up and make a new aluminium section.
But more progress- it may be running again by the weekend, with a bit of luck.

[Redthunder]

Fitted cbr 929 calipers

[lloydie]

Fitted cbr 929 calipers

Did you fit the master cylinder too ?

[Redthunder]

Fitted cbr 929 calipers

Did you fit the master cylinder too ?

No, thought I'd see how it goes with stock.
Haven't bled them up yet as awaiting new pads.

[Ckennedy]

You may find they won't work. It needs the bigger master cylinder to push enough fluid to the calipers

[grumpyfrog]

I have 929's on mine, Storm MC and no probs at all. Maybe I dont abuse them as much as others on here but all ok for me.

[lloydie]

Yep you'll easily be able to pull the lever to the bar before you stop !!
You will have much more feel but it won't stop the bike if needed .
Ideal for long term wet weather use as you can just grab the lever and you won't lock it up

[lloydie]

Think I'm right in thinking the storms is a 14mm and the 929 is a 17mm and the 954 is a 19mm .
So going by that as grumpy frog says will work not great tho .
But fitting the storms master to the 954 calipers is a no no

[agentpineapple]

Think I'm right in thinking the storms is a 14mm and the 929 is a 17mm and the 954 is a 19mm .
So going by that as grumpy frog says will work not great tho .
But fitting the storms master to the 954 calipers is a no no

what about fitting a cbr600 m/c to sp2 calipers???

[lloydie]

Think I'm right in thinking the storms is a 14mm and the 929 is a 17mm and the 954 is a 19mm .
So going by that as grumpy frog says will work not great tho .
But fitting the storms master to the 954 calipers is a no no

what about fitting a cbr600 m/c to sp2 calipers???[/
Check amcq chart ,

[Redthunder]

As I said I'll try it first. Can't be any worse than stock.

[tony.mon]

I'm currently running a too-small radial mc with Blade front end, inc F4i calipers.
The lever comes back to the bars, but will stoppie as it does so; so it's safe enough. However there's no room for fingers, so two-finger braking, or one, isn't possible.

I used it on a recent track day and was concerned that with a little fade I would be in trouble, but it seemed ok.

Needs fixing, though.

[grumpyfrog]

fec, another thing to add to the"to do list" then.