Jamoi's clearout...
Moderator: VTRDark
-
- Posts: 976
- Joined: Mon Nov 14, 2011 2:00 pm
- Location: Whaplode Drove, Lincolnshire
Re: Jamoi's clearout...
No problems. I got my eye Lloydies frame as well since i go a busted log on mine.Jamoi wrote:Hey Stuart, I'm afraid the fairing lowers have sold & the vintage stand is a paddock stand with rubber cups which sit under the swingarm.StuartWags wrote:have you still got the rear sets and a Abba type stand?
And the red belly pan thing.
I would come with extra cash as i may have other odds and sods too . But would be next weekend
No problems with a Paypal deposit to hold items if required
If there's anything else you'd like let me know, I think Lloydie & CK are coming down next Sunday...
-
- Posts: 621
- Joined: Sun Apr 07, 2013 12:02 am
- Location: Newport South Wales
Re: Jamoi's clearout...
Hi, have you still got the Discs #18? If so would you post?
Re: Jamoi's clearout...
I will take item 37 ....pillar drill
Does the motor run, and is it single phase?
Lloydie will try and fit it in his car next week end
Does the motor run, and is it single phase?
Lloydie will try and fit it in his car next week end
AMcQ
Re: Jamoi's clearout...
I can post, but that's a lot of weight. I'll get a quote if you're keen?Varastorm wrote:Hi, have you still got the Discs #18? If so would you post?
I'm not sure on both accounts there Al, these things are alien to me! However, I can get some more info from the manufacturers info plate stamped on the side and let you know before you commit.AMCQ46 wrote:I will take item 37 ....pillar drill
Does the motor run, and is it single phase?
Lloydie will try and fit it in his car next week end
Jamie
Re: Jamoi's clearout...
Hi, Yes, for £20 + postage if its not too bonkers I'll take a chance.Jamoi wrote:I can post, but that's a lot of weight. I'll get a quote if you're keen?
Consider them sold
Thanks Jamoi
Last edited by Varastorm on Wed Jan 14, 2015 4:19 pm, edited 2 times in total.
- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: Jamoi's clearout...
Jamoi wrote:I can post, but that's a lot of weight. I'll get a quote if you're keen?Varastorm wrote:Hi, have you still got the Discs #18? If so would you post?I'm not sure on both accounts there Al, these things are alien to me! However, I can get some more info from the manufacturers info plate stamped on the side and let you know before you commit.AMCQ46 wrote:I will take item 37 ....pillar drill
Does the motor run, and is it single phase?
Lloydie will try and fit it in his car next week end
Has it got a 3 pin plug on it or has it got 3 wires in the cable and are they green brown and blue !
missing the noise, not the vibes. However never say never!
Re: Jamoi's clearout...
Hi Al, found some info on the drill...AMCQ46 wrote:I will take item 37 ....pillar drill
Does the motor run, and is it single phase?
Lloydie will try and fit it in his car next week end
It's a Tauco DP220 from Milwakie, made in 1940ish.
It will need some work before use, the wiring needs a plug and tidying up. Also the belt on top is frayed.
Here is a page I found with some DP220 enthusiasts http://vintagemachinery.org/photoindex/ ... x?id=17656
I'm sure if cleaned up and after a bit of tlc it would be not only a good solid drill but, worth a bit of cash too.
Jamie
Re: Jamoi's clearout...
Boxed and ready to go, PM address pleaseVarastorm wrote:Hi, Yes, for £20 + postage if its not too bonkers I'll take a chance.Jamoi wrote:I can post, but that's a lot of weight. I'll get a quote if you're keen?
Consider them sold
Thanks Jamoi
Jamie
Re: Jamoi's clearout...
jamie, I have a buyer for the rentec fitting kit and the hugger, but looks like the hugger is gone
AMcQ
Re: Jamoi's clearout...
Hugger has gone I'm afraid, but rack fitting kit is still here.AMCQ46 wrote:jamie, I have a buyer for the rentec fitting kit and the hugger, but looks like the hugger is gone
Jamie