Manual Cam Chain Tensioner Installation Guide (MCCT's)

[VTRDark]

See the post above yours.

I wouldn't panic, ride the bike an enjoy it, but do something about the cct's sooner rather than later. A failure is something that can happen without any prior warning signs and mileage is irrelevant. You may develop a rattle, you may not.

Welcome to the forum Also see the Read Me For New Members in my signature below.

(:-})

[OneNOnlyKev]

I am a complete novice and have followed this by the letter! one proud little gerbil here, job done running sweet and time for a well earned brew!!
Fantastic right up!!

[VTRDark]

Well thank you very much sir, and well done to you.

I bet you feel a sense of achievement now. It's good to know that even a complete novice (as you put it) can follow the guide with no issues. Brew up then, time for the TT..... one for and one for me.

(:-})

[OneNOnlyKev]

Nothing like a good brew!

[artee]

Ok.
My tensioners have arrived.
Is there any one out there willing to either do the job for me, or watch over me whilst I do the swap.
Come to me(Rochdale), or I can come to yours,
Payment for your time will be made.
Thanks.
Roger

[BrianC]

Hi roger

Just waiting for mine to arrive then I need to have a go I think - it is a bit daunting I agree

Brian

[lloydie]

Sounds like you guys need to attend mac v2 workshop day


Sent from my iPhone using Tapatalk

[artee]

Sounds like you guys need to attend mac v2 workshop day


Sent from my iPhone using Tapatalk

Sounds good. What is it?

[lloydie]

Have look in the ride out section Mac is holding a workshop day where members get together and help other members with support and know how


Sent from my iPhone using Tapatalk

[BrianC]

I'm definitely going to have a go as the instructions here are very comprehensive.

Having done a full service now my confidence is growing and as soon as my bike lift is free I'll start taking bits off !!!!

[artee]

I dont have a garage.
So I need to finish the job after it's started.

Roger

[artee]

Have look in the ride out section Mac is holding a workshop day where members get together and help other members with support and know how


Sent from my iPhone using Tapatalk

Had a look, cant find it.

Roger

[lloydie]

Have look in the ride out section Mac is holding a workshop day where members get together and help other members with support and know how


Sent from my iPhone using Tapatalk

Had a look, cant find it.

Roger

http://www.vtr1000.org/phpBB3/viewtopic ... 14&t=36154


Sent from my iPhone using Tapatalk

[artee]

Have look in the ride out section Mac is holding a workshop day where members get together and help other members with support and know how


Sent from my iPhone using Tapatalk

Had a look, cant find it.

Roger

http://www.vtr1000.org/phpBB3/viewtopic ... 14&t=36154


Sent from my iPhone using Tapatalk

Thanks lloydie.
its a bit too far to go to.
Thanks for the heads up, would be a great weekend.
Ive been down to Gillingham in a car, a horrible journey it was as well.

Roger

[MacV2]

Thanks lloydie.
its a bit too far to go to.
Thanks for the heads up, would be a great weekend.
Ive been down to Gillingham in a car, a horrible journey it was as well.

Roger

I've been to Gillingham on a bike & in a car...it's a shite hole however you get there...