the curled fitting you can see is just a dust / muck cover more than anything else
Thanks for the confirmation on that Seb. That certainly puts a twist in things. But as Chric has just found out it may also get in the way of the belly pan. I really can't see any advantage in one of these except for a spout to drain oil off. If an oil pan is placed correctly underneath there is no spillage anyway.
(:-})
On my powerbronze belly pan i had made a cut out for it bud so i didn't have to remove it which was handy as i just fed the pipe with the locking push twist fitting into the drain valve, twist and go and your oil was out no problem
But as Chric has just found out it may also get in the way of the belly pan.
I really can't see any advantage in one of these except for a spout to drain oil off. If an oil pan is placed correctly underneath there is no spillage anyway.
