tank bolt
Moderator: VTRDark
Re: tank bolt
http://www.ronayersmotorcycles.com/fich ... veh=132082
https://www.davidsilverspares.co.uk/par ... rt-number/
It's a common Honda part - and the nut is a bog standard 10mm 'un. Just get the part no. from Ron Ayers and either paste it into DS find by part no. or google it for other suppliers.
https://www.davidsilverspares.co.uk/par ... rt-number/
It's a common Honda part - and the nut is a bog standard 10mm 'un. Just get the part no. from Ron Ayers and either paste it into DS find by part no. or google it for other suppliers.
It may be that your whole purpose in life is simply to serve as a warning to others.
VTR Firestorm and other bikes t-shirts
VTR Firestorm and other bikes t-shirts
Re: tank bolt
thanks I,ll do that now
Re: tank bolt
The thread goes.
Cut off the threaded part, drill a hole down the end and tap it.
Then insert an M6 bolt, cut the head off.
Job done.
Cut off the threaded part, drill a hole down the end and tap it.
Then insert an M6 bolt, cut the head off.
Job done.
It's not falling off, it's an upgrade opportunity.
Re: tank bolt
thanks that's a good idea as the postage is more than the bolt