Case gaurds??

Pistonguy · Post by **Pistonguy** » Tue Jul 07, 2015 2:02 am

Where do i find some? Dropped the bike in a 5mph incident with some gravel a few years back and got lucky i didnt do much more than cosmetic damage. I wanna get some if there is a next time...... Where to find? Google search here in the USA doesnt show much lol.

Sent from my iPhone using Tapatalk

MacV2 · Post by **MacV2** » Tue Jul 07, 2015 5:50 am

http://www.carbonadi.de/

stealthbomber · Post by **stealthbomber** » Tue Jul 07, 2015 3:16 pm

As above, got a set from him last week although I contacted him through the uk ebay site, delivered within a week

Pistonguy · Post by **Pistonguy** » Wed Jul 08, 2015 2:37 am

How do they fit? I checked the website but i dont know any german lol:-/

Sent from my iPhone using Tapatalk

MacV2 · Post by **MacV2** » Wed Jul 08, 2015 5:52 am

Pistonguy wrote:How do they fit? I checked the website but i dont know any german lol:-/

Sent from my iPhone using Tapatalk

You glue them on.

TheGingerBeardMan · Post by **TheGingerBeardMan** » Wed Jul 08, 2015 12:03 pm

This is turning into the song "There's a hole in my bucket, (dear liza, dear liza....")

I mean:

Where do I get case guards?, dear forum, dear forum...

From Carbonadi, or ebay, dear piston, dear piston.

And how do I fit them?, dear forum, dear forum....

"With Glue....." dear piston, dear piston....with glue.

I'm waiting for:

"With WHAT type of glue shall I fix them?, dear forum...

And, I'll come down and let the air out of Macs tyres if he just replies with: "Strong"

Wicky · Post by **Wicky** » Wed Jul 08, 2015 12:24 pm

Hoof Glue - Made from toenail cuttings

https://en.wikipedia.org/wiki/Hoof_glue

TheGingerBeardMan · Post by **TheGingerBeardMan** » Wed Jul 08, 2015 12:46 pm

HOOF GLUE?

I'm not even gonna ask what you were searching for on t'internet, and then found that....

Wicky types in: "what to do with all the old hoofs I've collected over the years?"

"How can I recycle my cows to get the most out of them?"

"I have 6 dead giraffes in my garage - what can they be used for, other than propping up the rafters?"

MacV2 · Post by **MacV2** » Wed Jul 08, 2015 5:08 pm

Strong...Just let us know when you coming GBM, I'll make sure the kettels on & me compressor is fired up & ready...

I think the consensus around these here parts is to use Silicone, pref a heat resitant one. A few dabs only should do it just in case you someday need to remove them...

Pete.L · Post by **Pete.L** » Wed Jul 08, 2015 8:18 pm

TheGingerBeardMan wrote:This is turning into the song "There's a hole in my bucket, (dear liza, dear liza....")

You gotta love this place

Shame Mac gave a sensible answer in the end, I was hoping to learn a new verse

Sorry Piston Guy but FAF

Pete.l

Varastorm · Post by **Varastorm** » Wed Jul 08, 2015 8:27 pm

One of the best glues I have used is E6000. Its the glue that I repair my Arai helmets with & make RamAir foam filter inserts for crossers with too. Its fab

Btw, the best glues always have a Warning on them

http://www.ebay.co.uk/itm/Industrial-E6 ... 41770ecb88

stealthbomber · Post by **stealthbomber** » Wed Jul 08, 2015 9:55 pm

Pistonguy wrote:How do they fit? I checked the website but i dont know any german lol:-/

Sent from my iPhone using Tapatalk

He supplied mine with glue, don't worry about the language barrier, his english is better than some on here

stealthbomber · Post by **stealthbomber** » Wed Jul 08, 2015 10:01 pm

Varastorm wrote:One of the best glues I have used is E6000. Its the glue that I repair my Arai helmets with & make RamAir foam filter inserts for crossers with too. Its fab

Btw, the best glues always have a Warning on them

http://www.ebay.co.uk/itm/Industrial-E6 ... 41770ecb88

Anything with industrial strength on it gets my attention

popkat · Post by **popkat** » Wed Jul 08, 2015 10:25 pm

I used a high temp silicone.

Pistonguy · Post by **Pistonguy** » Wed Jul 08, 2015 11:33 pm

Well ebay over here and ebay in the UK are totally different and most the only parts you can find for a VTR1000 are total junk and wont even fit most of the time. You just cant find decent stuff here, so i spend hours pointlessly searching online or, i figure i can just ask here. I dropped the bike in some gravel/snow.... And i got very lucky the right side case survived. I just want some extra protection so i dont have to write off a bike in case i drop it again..

Sent from my iPhone using Tapatalk

VTR1000.ORG

Case gaurds??

Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??

Re: Case gaurds??