Rear foot pegs
Rear foot pegs
I have high level Scorpians on my Firestorm so the original rear foot pegs don't fit, is there a mod or some other foot rests that will do the trick.
Re: Rear foot pegs
Yes a set of spacers & longer bolts...VTRpaul wrote:I have high level Scorpians on my Firestorm so the original rear foot pegs don't fit, is there a mod or some other foot rests that will do the trick.
Making up since 2007, sometimes it's true...Honest...
Re: Rear foot pegs
As Mac says, spacers and longer bolts are what's needed for Scorpion cans, but looking at your bike pictures (link:- http://www.vtr1000.org/phpBB3/viewtopic ... 05#p393305 ), I think your cans (and most likely link pipes as well) look like "Art" can's to me, with Scorpion decals on them. Spacers for the rear footrests may still work though,
Chris.
Chris.
- bazzashadow
- Posts: 741
- Joined: Sun May 11, 2014 10:57 pm
Re: Rear foot pegs
I made my own spacers out of 15mm hex bar (4 of)
if you look at over pictures on here or on google your see what I mean
if you look at over pictures on here or on google your see what I mean
Re: Rear foot pegs
Over Pictures ?bazzashadow wrote:I made my own spacers out of 15mm hex bar (4 of)
if you look at over pictures on here or on google your see what I mean
- spikenipple
- Posts: 89
- Joined: Tue Aug 09, 2011 2:03 pm
- Location: Trowbridge, Wilts
- bazzashadow
- Posts: 741
- Joined: Sun May 11, 2014 10:57 pm
Re: Rear foot pegs
VTRpaul wrote:Over Pictures ?bazzashadow wrote:I made my own spacers out of 15mm hex bar (4 of)
if you look at over pictures on here or on google your see what I mean
Alright, alright
I can't spell and that's why I dig ole's
OTHER