EBC Prolites & HH pads just fitted....

General Bike chat
Post Reply
User avatar
thetyrant
Posts: 64
Joined: Thu Jul 10, 2003 6:50 am
Location: Cumbria-UK
Contact:
Contact thetyrant

EBC Prolites & HH pads just fitted....

Post by thetyrant »

Just fitted the discs and pads as subject line....very impressed nearly flipped me over the bars 8O ....tremendous power and feel compared to the standatd discs and Ferodo pads that were fitted when i got the bike....also already had braided steel hoses on so i guess the front brake is pretty much sorted.....now about the rear...seems rubbish..i have cleaned the pistons etc and still has about as much power as my old mbx50 rear drum used to have....any ideas ??? was thinking of trying the EBC HH pads in the back as well to see..anyone ??

Cheers

Ian
Cumbria - It may be quiet but it has some of the best roads in the world :-)

98 VTR1000 Firestorm in Yellow - Micron Race carbon cans, Ohlins shock, Revolution Fork upgrade.....
94 Mitsubishi Evo2 - 2.3stroker @ 1.8 bar, 400bhp & 420 Ft/lbs..eeek
Top
User avatar
Vstormer
Posts: 65
Joined: Fri Jul 18, 2003 7:27 am
Location: Midlands

Post by Vstormer »

When you fitt HH,s on front you should fit them on rear at same time.
Top
User avatar
thetyrant
Posts: 64
Joined: Thu Jul 10, 2003 6:50 am
Location: Cumbria-UK
Contact:
Contact thetyrant

Post by thetyrant »

Yer i was thinking i had better do that now....got a set ordered along with a Pipercross Airfilter and a set of plugs might as well get it all out the way....Camchain tensioners on order as well...im gona be a busy :roll:

Cheers

Ian
Cumbria - It may be quiet but it has some of the best roads in the world :-)

98 VTR1000 Firestorm in Yellow - Micron Race carbon cans, Ohlins shock, Revolution Fork upgrade.....
94 Mitsubishi Evo2 - 2.3stroker @ 1.8 bar, 400bhp & 420 Ft/lbs..eeek
Top
Post Reply

Return to “Bike Chat”