I've stripped some casings ready for a re fresh but I'm struggling to find a replacement water pump bearing and associated parts to refit.
Any ideas where I may find any many thanks
Water pump bearing
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Water pump bearing
https://www.fowlersparts.co.uk/parts/51 ... water-pump
Number 11 ?, no stock at Fowlers but looks like it could be a fairly common bearing, maybe someone has a case off and can look at the bearing number then just get it at a local bearing factor.
.
Number 11 ?, no stock at Fowlers but looks like it could be a fairly common bearing, maybe someone has a case off and can look at the bearing number then just get it at a local bearing factor.
.
http://www.bidefordmotorcycles.co.uk
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
2014 CRMC Post classic Superbike champion.
2014 CRMC Post classic senior production champion. On a Suzuki Katana 1100
My bikes, Firestorm, Suzuki GSX-s1000 Katana, VFR800Fi. Projects, 1986 popup Katana, 3 XJ600’s
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Water pump bearing
Cheers popkat
Re: Water pump bearing
http://www.bike-parts-honda.com/pieces- ... STORM.html
Try David Silvers if you want genuine Honda (Use the search by part number and copy paste the Honda part no) or as suggested find a local bearing distributor and take the old one in for them to match (BEARING, RADIAL BALL, 6200) (10x30x9mm ?) Should be a third / half the price of Honda, and they should be able to supply the corresponding oil seal as well.
Try David Silvers if you want genuine Honda (Use the search by part number and copy paste the Honda part no) or as suggested find a local bearing distributor and take the old one in for them to match (BEARING, RADIAL BALL, 6200) (10x30x9mm ?) Should be a third / half the price of Honda, and they should be able to supply the corresponding oil seal as well.
It may be that your whole purpose in life is simply to serve as a warning to others.
VTR Firestorm and other bikes t-shirts
VTR Firestorm and other bikes t-shirts
Re: Water pump bearing
+1 There will be a bearing factors somewhere near you. I used Kent bearings in Strood when I did a swingarm refresh, what they didn't have on the self they orderd in & was ther in a few days.Wicky wrote:http://www.bike-parts-honda.com/pieces- ... STORM.html
Try David Silvers if you want genuine Honda (Use the search by part number and copy paste the Honda part no) or as suggested find a local bearing distributor and take the old one in for them to match (BEARING, RADIAL BALL, 6200) (10x30x9mm ?) Should be a third / half the price of Honda, and they should be able to supply the corresponding oil seal as well.
Making up since 2007, sometimes it's true...Honest...
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Water pump bearing
Many thanks guys .
I went to a local bearing place near me £3.89 for the bearing while I was there I brought a set of ceramic bearings for the dymag wheels.
All I got to do now is replace the mechanical seal for the w/pump. I did briefly consider an electronic water pump but got lost in the depths of it all so I'll stick to the std wp
I went to a local bearing place near me £3.89 for the bearing while I was there I brought a set of ceramic bearings for the dymag wheels.
All I got to do now is replace the mechanical seal for the w/pump. I did briefly consider an electronic water pump but got lost in the depths of it all so I'll stick to the std wp
Re: Water pump bearing
I have a 2nd hand impeller with a good ceramic seal if you need one.monkeymatt wrote:Many thanks guys .
I went to a local bearing place near me £3.89 for the bearing while I was there I brought a set of ceramic bearings for the dymag wheels.
All I got to do now is replace the mechanical seal for the w/pump. I did briefly consider an electronic water pump but got lost in the depths of it all so I'll stick to the std wp
How much were the ceramic bearings?
It's not falling off, it's an upgrade opportunity.
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Water pump bearing
tony.mon wrote:I have a 2nd hand impeller with a good ceramic seal if you need one.monkeymatt wrote:Many thanks guys .
I went to a local bearing place near me £3.89 for the bearing while I was there I brought a set of ceramic bearings for the dymag wheels.
All I got to do now is replace the mechanical seal for the w/pump. I did briefly consider an electronic water pump but got lost in the depths of it all so I'll stick to the std wp
How much were the ceramic bearings?
I'll bear that in mind Tony
Ceramic bearings total of 4 bearings £67