Nearly ready
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Nearly ready
They are indeed .
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Nearly ready
Looks amazing. Brilliant job. W ish mine looked like that.
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Nearly ready
agentpineapple wrote:oil cooler lets it down pmsl...........
Funnily enough a replacement is on its way
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Nearly ready
monkeymatt wrote:agentpineapple wrote:oil cooler lets it down pmsl...........
Funnily enough a replacement is on its way
HEY YOU GUYS!!!!!!
Re: Nearly ready
I like the colour of those cam covers. The Red stater cable cap lets it down...that's 10bhp lost there. Have you go the braced frame to go on. And what about Carbs have you got some nice magnesium ones to go on
==============================Enter the Darkside
Re: Nearly ready
Oh good , looking very nice by the waymonkeymatt wrote:They are indeed .
SH#T HAPPENS!!!!!!!!
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Nearly ready
cybercarl wrote:I like the colour of those cam covers. The Red stater cable cap lets it down...that's 10bhp lost there. Have you go the braced frame to go on. And what about Carbs have you got some nice magnesium ones to go on
I have
Last edited by monkeymatt on Fri Jun 24, 2016 10:23 pm, edited 1 time in total.
Re: Nearly ready
Hey that's looking great
Has Roger put anything extra in the engine rebuild
Chris.
Has Roger put anything extra in the engine rebuild
Chris.
-
- Posts: 328
- Joined: Fri Jun 06, 2014 9:11 am
- Location: Southampton . Hampshire
Re: Nearly ready
Nothing extra in the rebuild
Mori pistons ,mori cams, crankcase mod, ported heads, mori clutch springs. All bearings rings etc etc lightened flywheel
Had the crank polished and balanced
Mori pistons ,mori cams, crankcase mod, ported heads, mori clutch springs. All bearings rings etc etc lightened flywheel
Had the crank polished and balanced
Re: Nearly ready
WOWmonkeymatt wrote:Nothing extra in the rebuild
Mori pistons ,mori cams, crankcase mod, ported heads, mori clutch springs. All bearings rings etc etc
Had the crank polished and balanced
Chris.
- Pete.L
- Forum Health And Safety Officer
- Posts: 7224
- Joined: Fri Sep 26, 2003 5:09 pm
- Location: Bristol
Re: Nearly ready
Oh Wow!
Can't wait to see how that goes
Can't wait to see how that goes
My new ride is a bit of a Howler and I love to make her Squeal