Evening all, newbie signing in.
-
- Posts: 23
- Joined: Tue Sep 06, 2016 1:42 pm
Evening all, newbie signing in.
Hi Guys,
About to become the owner of a nice 1997 VTR at the weekend. It's been looked after very well by previous owners, but has the CCT issue currently so I have got it for a good price. I'm sure this site will become very useful once I get her home and start to have a proper look.
Cheers,
Bert
About to become the owner of a nice 1997 VTR at the weekend. It's been looked after very well by previous owners, but has the CCT issue currently so I have got it for a good price. I'm sure this site will become very useful once I get her home and start to have a proper look.
Cheers,
Bert
-
- Posts: 172
- Joined: Fri Feb 21, 2014 10:33 pm
- Location: Gloucester
Re: Evening all, newbie signing in.
Hi, welcome to the form.if you need any help with manual ccts,just give me a shout.cheers Ade.
Re: Evening all, newbie signing in.
Welcome to the madhouse. Hope it's a red one............ Everyone round here knows it's the fastest colour
TIP; Never take a sleeping pill and laxative on the same night
http://morrisonbhp.net/
http://morrisonbhp.net/
- alanfjones1411
- Posts: 2822
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: Evening all, newbie signing in.
Hello and welcome to the forum Is it the black one on ebay that the the owner says could be big ends ?
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
Re: Evening all, newbie signing in.
When you say it has the CCT issue do you mean it has a rattle, failed or simply needs changing. And to make things more clear Ade;s comment means he sells MCCT's. I don't think that is an offer to comes around and help fit them but I could be wrong
Welcome to the forum. check out the link below for new members. Lots of info there to get you started.
Welcome to the forum. check out the link below for new members. Lots of info there to get you started.
==============================Enter the Darkside
-
- Posts: 23
- Joined: Tue Sep 06, 2016 1:42 pm
Re: Evening all, newbie signing in.
Thanks I will bare you in mind ;)adewhitmarsh wrote:Hi, welcome to the form.if you need any help with manual ccts,just give me a shout.cheers Ade.
-
- Posts: 23
- Joined: Tue Sep 06, 2016 1:42 pm
Re: Evening all, newbie signing in.
No it was on eBay though but has a customer paint job in Repsol colours, current owner stated he was doing approx. 50mph and he heard a lot of top end noise. Now when turning the engine over he stated that you can hear what sounds like the valves train.alanfjones1411 wrote:Hello and welcome to the forum Is it the black one on ebay that the the owner says could be big ends ?
Sorry it's not red, but I am sure it you would still approve.hallie wrote:Welcome to the madhouse. Hope it's a red one............ Everyone round here knows it's the fastest colour
I haven't heard the engine, but can only tell you what the current owner told me as I post above. Once I get it home, I will have a good look around and investigate further. That is a shame that Ade won't come and fix it for me .cybercarl wrote:When you say it has the CCT issue do you mean it has a rattle, failed or simply needs changing. And to make things more clear Ade;s comment means he sells MCCT's. I don't think that is an offer to comes around and help fit them but I could be wrong
Welcome to the forum. check out the link below for new members. Lots of info there to get you started.
Thanks all
Re: Evening all, newbie signing in.
Welcome in...Let us know whereabouts your located & someone local may be able to help you out.
As far as...''That is a shame that Ade won't come and fix it for me ...''
He's only after your cash to sell you a set of manual CCT's...All the info he can give you is already up on this site in the 'workshop knowledge ' section...It's where he got it from...
As far as...''That is a shame that Ade won't come and fix it for me ...''
He's only after your cash to sell you a set of manual CCT's...All the info he can give you is already up on this site in the 'workshop knowledge ' section...It's where he got it from...
Making up since 2007, sometimes it's true...Honest...
Re: Evening all, newbie signing in.
Welcome to the club Bert
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
- carmanbikes
- Posts: 894
- Joined: Sat Dec 22, 2012 11:09 am
- Location: Wigan
Re: Evening all, newbie signing in.
Hello and welcome, loads of help and advice on here I bought one with the same problem and people on the forum was great
Re: Evening all, newbie signing in.
Plenty of help here, just one tip from me.....don't put diesel in it......they seem to go much better on pure petrol
Re: Evening all, newbie signing in.
Richard wrote:Plenty of help here, just one tip from me.....don't put diesel in it......they seem to go much better on pure petrol
Welcome aboard Bert
Which area are you from
Chris.
-
- Posts: 23
- Joined: Tue Sep 06, 2016 1:42 pm
Re: Evening all, newbie signing in.
Thanks guys for the warm welcome,
Originally I class myself as a Wiganer, but now I live in Herefordshire amongst the cider apples
Originally I class myself as a Wiganer, but now I live in Herefordshire amongst the cider apples
Re: Evening all, newbie signing in.
Hi & welcome Bert.
Lets see some pickies, we all love pickies
Lets see some pickies, we all love pickies
-
- Posts: 23
- Joined: Tue Sep 06, 2016 1:42 pm
Re: Evening all, newbie signing in.
I'll get some tomorrow to put up, I've had to re-arrange collection until tomorrow morning.Varastorm wrote:Hi & welcome Bert.
Lets see some pickies, we all love pickies