Worcestershire Workshop day - May 13th

Get on yer bike and lets rumble!!

Moderators: AMCQ46, geodude

Post Reply

Dates for Midlands workshop

Poll ended at Tue Feb 21, 2017 11:35 am

April 29th
0
No votes
May 6th
2
33%
may 13th
4
67%
 
Total votes: 6

User avatar
Pete.L
Forum Health And Safety Officer
Posts: 7259
Joined: Fri Sep 26, 2003 5:09 pm
Location: Bristol

Re: Worcestershire Workshop day - May 13th

Post by Pete.L »

Yes I'm on the bike.
I was just saying that I could put stands in my car.
It's not much help, as I won't be in the car, but I like to join in.
Pls bring the abba bits
No Problems Tony. See you there :thumbup:

Pete.l
My new ride is a bit of a Howler and I love to make her Squeal
User avatar
AMCQ46
Posts: 16649
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Worcestershire Workshop day - May 13th

Post by AMCQ46 »

tony.mon wrote:I'll also be replacing front and rear wheel spacers with lightweight captive ones and fitting a new clutch pack into the slipper clutch.
Have you got a 1/2 inch drive breaker bar and large torque wrench?
Might as well get a couple of little jobs out of the way.

yes, have both
AMcQ
User avatar
AMCQ46
Posts: 16649
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Worcestershire Workshop day - May 13th

Post by AMCQ46 »

podman wrote:Ill be with you around 1pm bud, does that still give us reasonable time to do the stopper mod? Do I need to bring anything with me?

Much appreciated.
we should be able to do it in an hour and a bit as long as the inspection caps are not seized. have you tried to see if they come out?
AMcQ
User avatar
AMCQ46
Posts: 16649
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Worcestershire Workshop day - May 13th

Post by AMCQ46 »

bigtwinthing wrote:iam i getting a trip up to feed the horses?
will ask but shouldn't be a problem as long as they are not out racing
AMcQ
tony.mon
Posts: 16147
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Worcestershire Workshop day - May 13th

Post by tony.mon »

AMCQ46 wrote:
podman wrote:Ill be with you around 1pm bud, does that still give us reasonable time to do the stopper mod? Do I need to bring anything with me?

Much appreciated.
we should be able to do it in an hour and a bit as long as the inspection caps are not seized. have you tried to see if they come out?
I'll bring a spare slightly battered but useable on in case it puts up a fight.
It's not falling off, it's an upgrade opportunity.
User avatar
alanfjones1411
Posts: 2822
Joined: Thu May 21, 2015 3:33 pm
Location: watford

Re: Worcestershire Workshop day - May 13th

Post by alanfjones1411 »

bigtwinthing wrote:
bigtwinthing wrote:
alanfjones1411 wrote: Warwick services just before turning off m40 I think. Better check though

does anybody want to meet in the Warwick services for 0800-0815 ?

thats about 30 miles from the "big Fry up " , i can do later if you wish. or if your embarrassed to be with a Triumph i can ride behind you. ( no "slow anyway " comments kev)

I will be merging with the M40 from M25 about 8:00.I stick to the speed limit cos i've got 9 points.So if you're behind me you'll probably catch me up.Worked out fuel stop and will want fuel at Warwick services.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
User avatar
podman
Posts: 597
Joined: Tue Nov 15, 2016 4:04 pm

Re: Worcestershire Workshop day - May 13th

Post by podman »

tony.mon wrote:
AMCQ46 wrote:
podman wrote:Ill be with you around 1pm bud, does that still give us reasonable time to do the stopper mod? Do I need to bring anything with me?

Much appreciated.
we should be able to do it in an hour and a bit as long as the inspection caps are not seized. have you tried to see if they come out?
I'll bring a spare slightly battered but useable on in case it puts up a fight.
Thank you, very kind...PS What and where are said inspection caps, I will try and give them a tweak this afternoon if it stops pissing down...
User avatar
MacV2
Posts: 17806
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Worcestershire Workshop day - May 13th

Post by MacV2 »

podman wrote: Thank you, very kind...PS What and where are said inspection caps, I will try and give them a tweak this afternoon if it stops pissing down...

Left hand side Generator cover... The big one is the bastid 10mm allen IIRC...best give it a good soak with Plus Gas over night. Give it a tweak to see if it moves but if it's stuck it will just chew up, so if it starts to chew leave it alone & let Tony at it with his hammer...
Making up since 2007, sometimes it's true...Honest...
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Worcestershire Workshop day - May 13th

Post by bigtwinthing »

alanfjones1411 wrote:
bigtwinthing wrote:
bigtwinthing wrote:

does anybody want to meet in the Warwick services for 0800-0815 ?

thats about 30 miles from the "big Fry up " , i can do later if you wish. or if your embarrassed to be with a Triumph i can ride behind you. ( no "slow anyway " comments kev)

I will be merging with the M40 from M25 about 8:00.I stick to the speed limit cos i've got 9 points.So if you're behind me you'll probably catch me up.Worked out fuel stop and will want fuel at Warwick services.

i will google that and get back to you.
missing the noise, not the vibes. However never say never!
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Worcestershire Workshop day - May 13th

Post by bigtwinthing »

right Alan, i will get to the oxford/m40 link about 0830, so may well see you on the M40. i will look out for a nice Storm.
missing the noise, not the vibes. However never say never!
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Worcestershire Workshop day - May 13th

Post by bigtwinthing »

Stay safe Guys, riding up. and back.
missing the noise, not the vibes. However never say never!
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: Worcestershire Workshop day - May 13th

Post by Watty »

Have fun chaps and keep em upright ( the bikes Lloydie, the bikes ) :thumbup:
SH#T HAPPENS!!!!!!!!
User avatar
Kev L
Posts: 11261
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Worcestershire Workshop day - May 13th

Post by Kev L »

Have a great day lads

:thumbup:
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
User avatar
MacV2
Posts: 17806
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Worcestershire Workshop day - May 13th

Post by MacV2 »

Have a good day chaps....

Would have joined you today but I have the Murvinator coming round with his broken Storm & a replacement engine...Oh & Vanstub as well to finish his bike off...

No barbieQ for us.

Good luck with putting up with Tony's jokes.

Keep an eye on Lloydie if he shows up...backs to the wall if he has lube in hand...

Keep the grease off Alisons white stilettos...
Making up since 2007, sometimes it's true...Honest...
User avatar
lloydie
Posts: 20927
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Worcestershire Workshop day - May 13th

Post by lloydie »

Well I'm at work so watch out for a pink truck !!!.

I might still make it
Post Reply