Hi all
I am having trouble with main fuse blowing at solenoid.
Battery was charged when the oil was being changed and new filter put on when I put the battery back in and went to connect it up the fuse blew.I left battery connected put in a new fuse but when I went to put the connector back on it just shorted straight away. what is puzzling me is no ignition on. its a direct short but looking at the loom I cant see anything stripped back to the frame to cause this
anyone any ideas
thanks MINTY
blowing main fuse at solinoid
Re: blowing main fuse at solinoid
Have you got the battery the right way round?
It's not falling off, it's an upgrade opportunity.
Re: blowing main fuse at solinoid
Been there done that...
The cables just about reach the struggle to get them on SHOULD have told me something was wrong...POP !
Ahhh quick change the fuse swap the batt round. No one will ever know...DOH!
Making up since 2007, sometimes it's true...Honest...
- StormyRob
- Posts: 1565
- Joined: Sat Nov 07, 2015 7:33 am
- Location: Northern Ireland. The place of legend
Re: blowing main fuse at solinoid
When some idiot put the battery in the wrong way round in my bike I had the main fuse go over and over. Turned out I just needed to change the reg rec and problem was solved as it was fried.
If you don't try you never know if you can do it.