Project Varatrackerstorm or Firetrackerdero.

Show off your bike, modifications or projects and share them with the world.
User avatar
Varastorm
Posts: 1150
Joined: Mon Apr 07, 2014 11:48 pm
Location: Isle of Anglesey

Re: Project Varatrackerstorm or Firetrackerdero.

Post by Varastorm »

Just seen this Indian exhaust. I'm not too keen on left handed exhausts tbh.

I had a left hand exit Muzzy 4-1 on my Zzr1100c3 back in the day, when on the side stand it looked as if there was no exhaust on it. It sounded like it too at full chat.

This is the route I'm thinking/forced to go down.

Image

Image
User avatar
AMCQ46
Posts: 16534
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Project Varatrackerstorm or Firetrackerdero.

Post by AMCQ46 »

that Indian exhaust looks sweet, if you can get the rear header out as neat at=s that you will be on a winner.

and with the carb and filers making a big statement on the other side it will balance the look well
AMcQ
User avatar
sirch345
Site Admin
Posts: 21668
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: Project Varatrackerstorm or Firetrackerdero.

Post by sirch345 »

My advise would be to give this exhaust route a real good thinking about before ploughing on ahead, especially seeing as it looks like you could be modifying the frame to accommodate it. This will save you less hassle later on in the build.

The exhaust stubs have turned out really well 8) well done,

Chris.
User avatar
Varastorm
Posts: 1150
Joined: Mon Apr 07, 2014 11:48 pm
Location: Isle of Anglesey

Re: Project Varatrackerstorm or Firetrackerdero.

Post by Varastorm »

This is were I'm going to cut guys, it was always the plan to remove these as well as the remains of the upper cradle sections.

Image

The plan was to remove them later though, not now.

I'm still playing with the idea of a removable rear subframe, so I'm hoping to use the existing frame as a guide so it's all straight.

Like you said AMcQ, I too think it'll balance it up :thumbup:
User avatar
Varastorm
Posts: 1150
Joined: Mon Apr 07, 2014 11:48 pm
Location: Isle of Anglesey

Re: Project Varatrackerstorm or Firetrackerdero.

Post by Varastorm »

Had a few too many tonight & I've been down the shed with my cutting wheel.

Image

Image

Image

Image

Image

Image
grumpyfrog
Posts: 1545
Joined: Thu Apr 14, 2011 1:22 pm
Location: Tayside

Re: Project Varatrackerstorm or Firetrackerdero.

Post by grumpyfrog »

Your a mad man....
And I love your way of work.

Well that's you committed now.
Love this project, can't wait to see it finished. Keep it going.
Don't hassle me
I'll get there at some time
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: Project Varatrackerstorm or Firetrackerdero.

Post by fabiostar »

grumpyfrog wrote: Sat Dec 30, 2017 8:32 am Your a mad man....
And I love your way of work.

Well that's you committed now.
Love this project, can't wait to see it finished. Keep it going.
correct, and the world needs more mad men lol.. :clap: :clap: :clap:
the older i get,the faster i was :lol:
User avatar
Varastorm
Posts: 1150
Joined: Mon Apr 07, 2014 11:48 pm
Location: Isle of Anglesey

Re: Project Varatrackerstorm or Firetrackerdero.

Post by Varastorm »

Cheers for the nice comments guys :thumbup:

Been down the shed for a few hours again today, not much done as there's been lots of sitting & thinking going on.

The main issues are to keep the exhaust away from me when I'm on the bike & attempt to make it look ok with the tight mandrel bends I've available.

All the Indian/Harley flat tracker exhausts I've seen use a combination of big sweeping bends & tight mandrel bends I'm trying my best to avoid a fifty pence look exhaust.

Here's were I am :thumbup:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
User avatar
sirch345
Site Admin
Posts: 21668
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: Project Varatrackerstorm or Firetrackerdero.

Post by sirch345 »

WOW you're making progress there, no holding you back by the looks of it :wink:

Keep up the good work :clap:

Chris.
User avatar
AMCQ46
Posts: 16534
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Project Varatrackerstorm or Firetrackerdero.

Post by AMCQ46 »

I love the vision, the skills and the Suck it and See attitude.... keep it up Vara :thumbup:
AMcQ
User avatar
Varastorm
Posts: 1150
Joined: Mon Apr 07, 2014 11:48 pm
Location: Isle of Anglesey

Re: Project Varatrackerstorm or Firetrackerdero.

Post by Varastorm »

Thanks again guys :thumbup:

Been eating & drinking non stop, so not much progress tbh.

I'm not too keen on the progress I've made either. I think I need a pipe bender.

I was worried I'd need one to avoid 50p bends & it looks as if I've got to get one.

What do you think, any comments/help appreciated :(

Image

Image

Image

Image

Image

Image

The picture below is the other idea/option, what do you recon, Thanks in advance :thumbup:

Image
User avatar
sirch345
Site Admin
Posts: 21668
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: Project Varatrackerstorm or Firetrackerdero.

Post by sirch345 »

Yes I can see what you mean, too much straight pipe with few bends/elbows once you leave the first part of the front pipework. In my personal opinion the first semi circle from the front cylinderhead is too tight of a radius which makes it look odd, also probably not helped by the exhaust outlet from the front head is further away from the side your pipework is going, unlike the rear cylinder. Of course the side rad will need taking into consideration I presume, otherwise I would say a bigger semi circle to start with, with it exiting higher up, me thinking the rad may mean you can't go higher up :problem: What you have done for the rear cylinder looks a lot better than where you are with the front pipework atm, which is I think what you are saying (hopefully :wink: ). I'm not sure if that is any help :?: hopefully it is,

The question is are you going for the extra work/expense as a pipe bender :?:

I'll give you 10/10 for enthusiasm though :thumbup:

Chris.
User avatar
Varastorm
Posts: 1150
Joined: Mon Apr 07, 2014 11:48 pm
Location: Isle of Anglesey

Re: Project Varatrackerstorm or Firetrackerdero.

Post by Varastorm »

Thanks for your input Chris :thumbup:

Radiator wise I was hoping to go single across the front. I've got two to play with, a SV1000n & a right hand Vtr.

Looks as if pie bends are the answer if I can't find suitable long bends.

This thing is faffin out of control big time :lol: :thumbup:
User avatar
fabiostar
Posts: 7541
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: Project Varatrackerstorm or Firetrackerdero.

Post by fabiostar »

i love the madness of this build.........crack on sir.. :thumbup: :thumbup: :thumbup: :thumbup: :thumbup:
the older i get,the faster i was :lol:
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Project Varatrackerstorm or Firetrackerdero.

Post by VTRDark »

Wow this incredible madness (be a good name for a band that) Yeh the front needs one big sweeping bend to look pretty. I hope your not forgetting the equal lengths, Where's that rear going? are you intending on putting a loop in somewhere or maybe one pipe will be furthur rearwards than the other. Considering what a challenging thing your doing here your doing a fantastic job. Amazing skills. :clap: :clap: :clap:
==============================Enter the Darkside
Post Reply