WIRE COLOURS Help.....

Buggs · Post by **Buggs** » Mon Jun 05, 2006 2:47 pm

Fitting an alarm to the storm and thought i would have a go myself and save some money. Appears straight forward but could be made easier if anyone knows the colour's of certain wires on a 2000 model.

Need to locate the live feed to the ignition key, the ignition wire that becomes live on turning the key on and also the wire that becomes live from the engine start button when it is pressed.

Any help would be great as trying to fit it all under the seat and access all the wires there.... Thanks

Kitch · Post by **Kitch** » Mon Jun 05, 2006 7:56 pm

according to my Haynes wiring diagram, I think the ignition live is plain red, the live on key turn is red and black. The starter switch one is yellow and red. 99% sure. A second opinion would be nice.

Buggs · Post by **Buggs** » Mon Jun 05, 2006 8:36 pm

Thanks... Never knew the Haynes manual listed them. Must get me one of those some time..... Thanks Again

Kitch · Post by **Kitch** » Mon Jun 05, 2006 9:45 pm

let me know if your battery explodes from following what I said...

(I triple checked it, so blame Haynes...)

Buggs · Post by **Buggs** » Wed Jun 07, 2006 10:45 pm

Thanks Kitch.... Fitted alarm and pleased to say bike still in one piece and alarm works fine. Thanks for your help and Haynes were right...