Alans AMAZING Single Swing Arm Pics!!!

[Rincewind]

right piccy's fist



and



will measure the pipes a bit later for you

dunno about what i want for em, wouldn't know what they're worth to be fair

[Rincewind]

right just done a quick measurement of the pipes, they are approximately 455mm for the main body

hope that helps

[alan]

Hi Rincewind
is the measurement not including the outlet pipe? I need to have a measure now and study the pipe to see if it will go but think of a price in the meantime
Alan

[Rincewind]

no it doesn't include the outlet pipe, just the main body of the exhaust

can remeasure to include the outlet, as soon as i've taken the kids to school

[alan]

No i just needed to know if it included the outlet cheers though.
Alan

[Rincewind]

well its now gone in to have the new link pipes made


piccys to follow.....

[sirch345]

well its now gone in to have the new link pipes made


piccys to follow.....

I look forward to seeing the pic's

[alan]

So do i Rincewind and Chris, could you ask the maker how much it would be to alter the rear header pipe. If you still have the pics of mine i want the pipe bringing over the right side of the swingarm then joining to the existing downpipe if that makes sense.

Thanks Alan

[Rincewind]

So do i Rincewind and Chris, could you ask the maker how much it would be to alter the rear header pipe. If you still have the pics of mine i want the pipe bringing over the right side of the swingarm then joining to the existing downpipe if that makes sense.

Thanks Alan

so you want just one pipe???

otherwise you have me foxed


pick bike up later as well

[alan]

No i will have to draw over one of my pics to show you and i still hav'nt measured my pipes yet been too busy with other peoples bikes.

Alan

[Kitch]

No i will have to draw over one of my pics to show you and i still hav'nt measured my pipes yet been too busy with other peoples bikes.

Alan

heh...

[alan]

What do you mean kitch heh

[Rincewind]

ok,have picked bike up, with new link pipes,

but not sure now, not exactly as i wanted but in fairness my cans are obviously longer than alan's (who i blantantly copying )

opinions ppl,be as brutal as you like









will it look better when i get the under tray fitted???

[Stormin Ben]

Well I like it

How much was it in the end?
Also, is that hanger strong enough?
Looks pretty flimsy imo, especially as you've now lost the additional mounting point under the footrest

And yes, it WILL look much better with a nice neat undertray rather than the black plastic spinnaker that comes as standard

[Rincewind]

all told it cost £70

the high levels were never mounted to the fixing point under the peg, and the piece of metal holding it is quite sturdy to be fair.

hence why i need to know if the SP hangers are the same "width" on the mounting holes as my old hangers are now too big