Speed limiter?

[tony.mon]

It's in the back of the Haynes manual or the Honda version.

It has also been shared in the Workshop Knowledgebase section of this forum.

[MacV2]

Still need wiring diagram from clusterpanel connector.

There is one connector with 16 pins. I have one wiring ,colours are not same as mine.

I have one wiring DIAGRAM,colours are not same as mine.

There are two different looms between the F & F2 onwards, later bikes, those with the digi clocks have a different loom. That's why there are different coloured wires.

[sirch345]

There is one connector with 16 pins. I have one wiring ,colours are not same as mine.

I have one wiring DIAGRAM,colours are not same as mine.

There are two different looms between the F & F2 onwards, later bikes, those with the digi clocks have a different loom. That's why there are different coloured wires.

Also, if your bike is one of the ones with that wire one person mentions about removing on the Superhawk link I posted up in an earlier post, you're going to need a wiring diagram for the specific bike. So for instance if your bike is a Japanese model you'll need a wiring diagram for the Japanese market bikes, it's not going to show up on our UK market wiring diagrams as our bikes don't have that restriction,

Chris.

[oas]

Yes, correct. If I get "normal" wiring diagram somewhere, I try to check what is different.Maybe one wire more or something in my version.

[sirch345]

Yes, correct. If I get "normal" wiring diagram somewhere, I try to check what is different.Maybe one wire more or something in my version.

That sounds about rIght to me
I did have a look for you in the manual I have which is for UK (European) bikes, but the wire described isn't there, which would be correct for bikes that are not restricted,

Chris.