todays' the day!

Zer0Zer0 · Post by **Zer0Zer0** » Tue Dec 05, 2006 12:38 pm

taking the old bitch [bike not wife] in for the mot today. fingers crossed everyone......oh and started back to work last thursday half shifts for the next six weeks..shoulder is holding up well..could be a good chrissy this year

iggy1966 · Post by **iggy1966** » Tue Dec 05, 2006 12:41 pm

Excellent news Marty

Hope it stays good for you now.

dookie · Post by **dookie** » Tue Dec 05, 2006 12:51 pm

Hope it passes m8 and nice to hear your earning again

see your on your way up again

dunk4230 · Post by **dunk4230** » Tue Dec 05, 2006 1:51 pm

Good luck with the MOT mate and glad your back at work
PS Thumper needs a lift to the DBF piss up on Saturday,what time i dont
know ask him lol

Post by **sirch345** » Tue Dec 05, 2006 2:31 pm

Excellent news Marty

Good luck with the mot

Chris.

thumper · Post by **thumper** » Tue Dec 05, 2006 3:45 pm

well sitting with baited breath here min,

if she fails then she goes in again till she passes

are you going to the DBF night oot zero??

, i am ok for a lift cheers though dunk , its the beauty of being an auld fella me boys are driving and now its pay back time ,after all the years o "dads taxi's"

Zer0Zer0 · Post by **Zer0Zer0** » Tue Dec 05, 2006 5:23 pm

No sorry its the wifes' b/day tomorrow..and ive' been living on brown sauce and rivita for the past six months not getting much in the way of sick pay....and the next payday is the 23rd dec.....

left the bike with the boys at J weir. for its mot tomorrow..fkin ell thumper the two mile ride today was the best ever..what did you do to it..it goes like hell.
much faster than i remember and it turns in like rossis' R1

thumper · Post by **thumper** » Tue Dec 05, 2006 5:26 pm

so did the bike pass the mot??? talk about spinning it out

dunk4230 · Post by **dunk4230** » Tue Dec 05, 2006 5:30 pm

Zer0Zer0 wrote: left the bike with the boys at J weir. for its mot tomorrow

keep up at the back Thumper

Zer0Zer0 · Post by **Zer0Zer0** » Tue Dec 05, 2006 5:34 pm

Be fair dunk m8 he s' a fifer after aw min jings.....

thumper · Post by **thumper** » Tue Dec 05, 2006 5:43 pm

doh!!! sometimes i put it in gear without pulling the clutch in , baldrocks

i live in fife , but i am a sheep shagger at heart ,, fae the broch min

Squiffythewombat · Post by **Squiffythewombat** » Tue Dec 05, 2006 5:43 pm

good luck dude, im sure it will fly past!

Glad to hear you back at work too! Every cloud and all...

Zer0Zer0 · Post by **Zer0Zer0** » Tue Dec 05, 2006 6:09 pm

ahc so tis awa doon they water far a but o fashin fer thay troot aye....

cupasoop · Post by **cupasoop** » Tue Dec 05, 2006 6:11 pm

I've had a crap day so this thread has cheered me up no end

good to hear marty

Zer0Zer0 · Post by **Zer0Zer0** » Wed Dec 06, 2006 1:00 pm

right ...needs a new set of tyres.. so ive got BTo2os on order..you were right thumper m8 summat is wrong with the right hand disc..its' not warped but its bent inwards about 3 inches some point on its circumference so it has a tight spot..but it did not fluctuate like a warpred disc on the test bed..so they reckon it could be the axel the boys at J Wier are gonna have a look see to see if it may be something fixable without having to buy new parts..but a new axel is only Â£30.. replacement subframe was fitted..and i have guaranteed straight discs in case they need replaced..otherwise it sailed through all the other tests even the lock to lock..the BTs will cost under Â£200 fitted. so i reckon on about Â£300- 350 parts labour and the Mot which means im back on the road for under Â£600. not bad for a total wreck after my off....next time its fully comp for me insurance wise, and im just about to call bennetts to see if they will cover a loaner till mine is ready to pick up..next week