Finished..

mak595 · Post by **mak595** » Fri Feb 23, 2007 3:33 pm

....for now

Thanks to Paul for the paint and for everybody here making me feel welcome

And a big shout out for my better half for letting me dissappear in the garage for hours and suppling me with coffee

Here's the spec

Revalved fireblade forks with ohlins springs
BSB spec spondon adjustable offset yokes (currently running 27.5mm, Knockhill track settings)
Triumph daytona clip-ons
R1 mudguard
spondon billet caliper mounts
braded brake lines all round
SBK pads
indicator holes in fairing plastic welded up and new smaller holes drilled for new flush mounts
sharkskin lower fairing
Alumminium mesh in intake holes
dark tint screen
ohlins steering damper
polished footpeg assembly's & top yoke
alumminium pegs for better feel
penske rear shock
black frame and swing arm
total respray in black with honda wing tank decals and red VTR on fairing
clear rear light & mini indicators
pyramid undertray
carbon hugger
K & N filter
dynojetted
high level fuel titanium cans with removable baffles
dunlop qualifers

errr...i think that's it........

.....for now

PS sorry if your on dial up

sparrowlegs · Post by **sparrowlegs** » Fri Feb 23, 2007 4:03 pm

Looks the dogs pods that...look forward to seeing it at Knott End all being well

mak595 · Post by **mak595** » Fri Feb 23, 2007 4:08 pm

sparrowlegs wrote:Looks the dogs pods that...look forward to seeing it at Knott End all being well

cheers, i try to get down to Knott End most wednesdays, depends on what shift i'm working

alan · Post by **alan** » Fri Feb 23, 2007 4:31 pm

Looks very good Mak bet your pleased its finished

dookie · Post by **dookie** » Fri Feb 23, 2007 4:49 pm

Same Fuel cans as me m8 , did you make them high level yersen?
bikes lookin luvly

mak595 · Post by **mak595** » Fri Feb 23, 2007 7:42 pm

dookie wrote:Same Fuel cans as me m8 , did you make them high level yersen?
bikes lookin luvly

bought some link pipes off ebay, haven't a clue what can's they were originaly made for, had to shorten them by about 4" as the cans stuck out of the back like afterburners!!!!

mak595 · Post by **mak595** » Fri Feb 23, 2007 7:48 pm

alan wrote:Looks very good Mak bet your pleased its finished

so's the wife

Stormin Ben · Post by **Stormin Ben** » Fri Feb 23, 2007 9:24 pm

Very nice indeed mate -with one objection!!

Dont like the red footpegs at all!!

Sorry, I know its all down to personal taste but they dont match anything else on an otherwise quality looking job

beckster · Post by **beckster** » Fri Feb 23, 2007 9:36 pm

very nice looking job,have you had it out for a good hoke

?

mak595 · Post by **mak595** » Fri Feb 23, 2007 10:56 pm

Stormin Ben wrote:Very nice indeed mate -with one objection!!

Dont like the red footpegs at all!!
Sorry, I know its all down to personal taste but they dont match anything else on an otherwise quality looking job

fair enough, they were on when a go it, might swop if some tasty rearsets appear

cupasoop · Post by **cupasoop** » Fri Feb 23, 2007 10:58 pm

Stormin Ben wrote:Dont like the red footpegs at all!!
Sorry, I know its all down to personal taste but they dont match anything else on an otherwise quality looking job

Yeh, paddock stand is a rubbish colour as well

mak595 · Post by **mak595** » Fri Feb 23, 2007 11:02 pm

beckster wrote:very nice looking job,have you had it out for a good hoke ?

nope, not since its had a paint job, rode it end of last year with the blade forks in it but it had a hagon shock in the back then.
Picking a new number plate up tomorrow, then just need to tax it.
There's a track day at Oulton tomorrow i could have done but wasn't sure if it would be ready

mak595 · Post by **mak595** » Fri Feb 23, 2007 11:12 pm

cupasoop wrote:
Stormin Ben wrote:Dont like the red footpegs at all!!
Sorry, I know its all down to personal taste but they dont match anything else on an otherwise quality looking job
Yeh, paddock stand is a rubbish colour as well

i hope that your not insinuating that i've got a gay paddock stand

cupasoop · Post by **cupasoop** » Fri Feb 23, 2007 11:16 pm

mak595 wrote:i hope that your not insinuating that i've got a gay paddock stand

Not at all. Just saying it dosnt match the bike. But now you mention it, it is quite a fetching pastel shade of purple. Colin and Justin sort that one out for you

Bondy · Post by **Bondy** » Sat Feb 24, 2007 7:47 am

Looking good mate, now im off to find out how to get one o them sharkskin lower fairings