I'm looking for some advice on fitting some new sprockets to my Storm and perhaps a new chain if needed.
I'm looking to go to 16/43 or 15/43. Will the original chain fit it?
I've changed my old classic's by attaching the old chain to the new chain and pulling it through. Can I do this on a Storm or is it major surgery time? Also is it easy to break the chain? (I realise I'll probably need a speedo healer if I go ahead with this mod when I'm finished)
By the way, before I go on ebay to buy one, has anyone got a 15 tooth and/or a 43 tooth that they want to sell?
Any port in a Storm...
Any port in a Storm...
It's all a big joke until you have somebody's eye out...
Cack handed mono monkey 
With the amount of throttle travel on the Storm, you could go to 14/50 and still not wheelie unless you wanted to.
That said, if you do motorways or very big distances, I'd go 15/41 or 16/43 as higher than that and you'll be pulling 5500 rpm in 6th at 80 which wont help the fuel range.
With the amount of throttle travel on the Storm, you could go to 14/50 and still not wheelie unless you wanted to.
That said, if you do motorways or very big distances, I'd go 15/41 or 16/43 as higher than that and you'll be pulling 5500 rpm in 6th at 80 which wont help the fuel range.
Voted most likely to be found dead in park bushes following an act of autoerotic asphyxiation.