Engine Lacquer

General Bike chat
Post Reply
User avatar
sirch345
Site Admin
Posts: 22402
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Engine Lacquer

Post by sirch345 »

Has anyone used a good clear engine lacquer that they can recommend :?:

Chris.
User avatar
LotusSevenMan
Posts: 1915
Joined: Wed Sep 06, 2006 8:32 pm
Location: Liss, Hampshire. UK

Post by LotusSevenMan »

Can't you just use your wifes nail polish like you normally do (ooops. Sorry. Forgot I said I'd keep quiet on the subject. Don't worry. No-one will know!!!) :D

There are some good spray ones used for model aircraft so are fuel proof. They do change the colour very slightly but don't go flaky or yellow off like some laquers.
"Only ride as fast as your guardian angel can fly" !!!
User avatar
sirch345
Site Admin
Posts: 22402
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Post by sirch345 »

LotusSevenMan wrote:Can't you just use your wifes nail polish like you normally do (ooops. Sorry. Forgot I said I'd keep quiet on the subject. Don't worry. No-one will know!!!) :D

There are some good spray ones used for model aircraft so are fuel proof. They do change the colour very slightly but don't go flaky or yellow off like some laquers.
I'll ignore the first bit Chris (LSM) :lol: :lol:

I hadn't thought about ones for model aircraft, thanks for the tip :D

Chris.
User avatar
warby221
Posts: 866
Joined: Fri Jan 05, 2007 7:42 pm
Location: lancs

Post by warby221 »

If your going to use a fuel proofer for use on model aircraft make sure you get the right one most model aircraft engines run on nitro methanol and it has different properties to petrol as nitro acts like a paint striper “nitromors” so ask for fuel proffer for petrol engine use you’ll find that its only epoxy clear coat so probably cheaper at a motor paint factors
User avatar
sirch345
Site Admin
Posts: 22402
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Post by sirch345 »

warby221 wrote:If your going to use a fuel proofer for use on model aircraft make sure you get the right one most model aircraft engines run on nitro methanol and it has different properties to petrol as nitro acts like a paint striper “nitromors” so ask for fuel proffer for petrol engine use you’ll find that its only epoxy clear coat so probably cheaper at a motor paint factors
Thanks for the info Warby, a very good point :!:

Chris.

PS. Kaz I guess you've sobered up now :wink: :lol:
User avatar
Squiffythewombat
Posts: 1406
Joined: Sun Apr 17, 2005 1:51 pm
Location: Canterbury, Kent
Contact:

Post by Squiffythewombat »

Interesting idea chris, but which products? some are much better than others?
Squiffy_The_Wombat

Eagles may soar but wombats dont get sucked into jet engines!!
User avatar
LotusSevenMan
Posts: 1915
Joined: Wed Sep 06, 2006 8:32 pm
Location: Liss, Hampshire. UK

Post by LotusSevenMan »

I have used ones by 'Flair' and also the good old Humbrol one that was but probably is no more (who owns/does that stuff now).

There are these spray cans like this too.

http://www.hobbiesr.com/top/top-137/topr7501.htm
"Only ride as fast as your guardian angel can fly" !!!
User avatar
sirch345
Site Admin
Posts: 22402
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Post by sirch345 »

Cheers Chris (LSM) that's very helpful :D

Chris.
Post Reply