GFK Belly Pan?

General Bike chat
Post Reply
Andy1671
Posts: 75
Joined: Thu Jul 26, 2007 9:49 am
Location: lancashire

belly pan

Post by Andy1671 »

Bracket dimensionsImageImageImage

Hope these help Beamish not to sure about my engineering drawings
I havent put hole positions on cos you need to drill the belly pan to make mounting holes and you would need to drill brackets to suit
Part A fits at the back on the left side to a sump screw
Part B fits at the front picking up the original mounting point
on the other side i will just use one screw to the front original mount point and see if it rattles about and maybe rethink it
Brackets are made from 4mm plate ally and bent in a vice by hand
Andy
I have reverse paranoia I think i am following somebody
Top
Beamish
Posts: 2862
Joined: Sun Sep 02, 2007 4:09 pm

Post by Beamish »

Thanks mate, drawings are great, I have worked to a lot worse drawings. Once I have shelled out for a new set of tyres this will be my next purchase.
I see myself as a sensitive intelligent man but with the heart of a clown that causes me to **ck things up right at that crucial moment........'Jim Morrison'
Top
Post Reply

Return to “Bike Chat”