Where do these go?!

Dazjm · Post by **Dazjm** » Fri Jun 13, 2008 5:07 pm

Any idea where abouts these go?

I seem to be left with 2 big bolts !

Just shy of 2 inches long, hex bolt, with smooth concave top.

warby221 · Post by **warby221** » Fri Jun 13, 2008 6:04 pm

A little bit of info on what you were doing at the time could help
IE engine out fairings off or suspension work

Dazjm · Post by **Dazjm** » Fri Jun 13, 2008 8:33 pm

Ahh true sry...

Ive had the entire back end off in bits, subframe, swingarm, linkage, aswell as all the fairing.

cupasoop · Post by **cupasoop** » Fri Jun 13, 2008 8:43 pm

Rear calliper?

alan · Post by **alan** » Fri Jun 13, 2008 8:46 pm

Is your bike folded in half in the middle

id say there linkage bolts you'll soon know when you've got no brakes or your rear wheel overtakes you

Dazjm · Post by **Dazjm** » Fri Jun 13, 2008 9:16 pm

Thought of those 2 first, but the rear caliper has both bolts in, and it looks like i got all the bolts in the shock/swingarm linkage.. Im thinking theyre extras, or old ones ive replaced with new.

SILVER ZIPPER · Post by **SILVER ZIPPER** » Fri Jun 13, 2008 9:47 pm

Sweep them under the carpet.

Andy1671 · Post by **Andy1671** » Sat Jun 14, 2008 8:01 am

They look like POCKET screws when you finish a job they just go in your pocket

andy c · Post by **andy c** » Sat Jun 14, 2008 9:34 am

If you've got bits left over you've done it right
The time to worry is when you've not got enough bits

cupasoop · Post by **cupasoop** » Sat Jun 14, 2008 10:45 am

We'd call them "cumfy bits". As in, where the wombles did these cumfy?

patty · Post by **patty** » Sat Jun 14, 2008 9:15 pm

cupasoop wrote:We'd call them "cumfy bits". As in, where the f*ck did these cumfy?

pat

warby221 · Post by **warby221** » Sat Jun 14, 2008 10:27 pm

Looking at them they may be of the plate that the dog bone fits (suspension linkage) to on the engine
Just a guess mine you