Another LED Indicator Question...

Beast · Post by **Beast** » Tue Jul 01, 2008 10:10 am

Where can i get the flush oval cat eye type led indicators for the front.
Can't find them anywhere... just being fussy because i like them.

Just want to upgrade mine from standard bulb to led.

If not could always fit the arrow type, but would i want the longer stem ones to bolt to on the inside plastic?
But then it leaves the ugly open hole... dont want to screw the other type onto the fairing and using the bike in all weathers dont think the stick on ones will last long...

Ideas please.

stevevtr1 · Post by **stevevtr1** » Tue Jul 01, 2008 7:04 pm

Not so sure about the flush fit cat eyes,are they led?the last pair i got were bulb type ( didn't fit too well either)
Got a pair of motrax D lights (Honda fitting)But had to make up a spacer kit to fit through the recess in the plastics.
Happy with the result tho'
[img]http://www.vtr1000.org/cpg/displayimage ... um=4&pos=0

Cheers
Steve

stevevtr1 · Post by **stevevtr1** » Tue Jul 01, 2008 7:19 pm

Have another go..
http://www.vtr1000.org/cpg/displayimage ... um=4&pos=0
The indi unit just about fills the hole in the fairing but,unless they have made a fitting kit ,which they hadn't when i got mine(18 mnthsback)you'll have to do some yourself.Happy to post the mods if you need.
Cheers
Steve

Beast · Post by **Beast** » Wed Jul 02, 2008 7:24 am

Steve very nice clean bike you have there and like the indicators.
Will have to check them out...
Cheers

Zakalwe · Post by **Zakalwe** » Wed Jul 02, 2008 8:09 am

I have a pair of these lurking in the gargae:

They are off a CBR1000RR (04), but i think that the cutout is the same on most Hondas? You are welcome to them if you want 'em!

Beast · Post by **Beast** » Wed Jul 02, 2008 6:03 pm

Yes please Zakalwe i will give them a shot, thanks.