VTR1000.ORG

Got to get them first sam lol.

i do like them lloyd but there a bit to big for the space i'll have left once the light is fitted nice and snug!

Most of it is out of sight from the front, its the sides thats the problem. I'm looking at fabbing some type of cover so the wires are not visible from the sides. Fairling that It will be a chop job to the wires cause there really is a shed load of stuff in there

My headlight might look like it will cover this up but to be honest there ain't gona be a lot of room behind there, yes most of it will be covered but there won't be much room.

i'll be stripping back the wiring loom to but only shortening the wires as i'll have to change all the connectors for the clocks anyway, those that are left for the swich gear etc should fit behind the fairing.

hopefully my old man will drop some sheet stainless steel of tonight so i can fab up the mounts,

i'm at a bit of a work stoppage at the moment,

waiting on clocks to do the wiring
mirror mounts to mount the mirrors
steel to fab the brakets
and the exhausts to fab the link pipes and mounts for them.
and obviously waiting for next tuesday to start the painting and finish the polishing.

When ya get it done we'll have to meet up somewhere for a Fighter ride out!!

yeah i want to g oup north yorkshire way one day, there is a village near mike that has the same name as i do and i'd like a photot of my bike infront of the sign, yeah sad i know but a good excuse for a ride out!!

Could always take your car, have the sign away then lol

FirestormMike wrote:A village called Dave ? New to me that.

no the village is called 'Hawes'

well hopefully some time in june-july would be nice but i'll have to see how it goes,

but for sure i'll let you know!!

Got head light mounted today,



it's not a nice a mount as i'd like but considering my tools and work space etc it will do, once panted it will blend in better and double up as a clock mount and will hide all the wires a treat!!

was also considering a small fly screen???????? any thoughts on that?

Looks alright that Dave good skills

Do you have a picture from straight on?

cause of the angle of the bike and the shed door not fully straight on. but not far off it.

problem is this picture is a little fuzzy so i'll take another tomorrow.

also had a pretty good day alround today.
exhausts arrived this morning then martyn called to say he had got us booked on the 1st trackday for this year, the new snetterton 300 on april the 11th. get in!!!!!!!!!!!!

dave-sp2 wrote:Got head light mounted today,

was also considering a small fly screen???????? any thoughts on that?

No, I tried one and small flies still get on the paint. Or pant.(see above)

Anyway, if the Allies impose a no fly zone you won't need it.

[quote="tony.mon"] Or pant.(see above)

quote]

thanks for that tony.
i have been useing the laptop now for a few weeks as the PC packed up again and the amount of letters it misses out is amazing, it takes me ages to make a post as i have to check it 2-3 times at least!

dave-sp2 wrote:

tony.mon wrote: Or pant.(see above)

quote]

thanks for that tony.
i have been useing the laptop now for a few weeks as the PC packed up again and the amount of letters it misses out is amazing, it takes me ages to make a post as i have to check it 2-3 times at least!

I wnt ber chekg it, jut leve it as it is and let pple wok out wt your trng to say

Damn work keyboard lol

i understood that no problems!!