Page 381 of 1529

Re: what have you done to your "bike" today

Posted: Tue Jun 25, 2013 10:20 pm
by darkember
cybercarl wrote:Don't throw the old bearings away just yet as you can use them to to help get the new ones in place. You don't want to directly hit the new ones with a hammer, so can use the old ones over the top and hit them instead. When you get the new one's, put the outer headstock race in the freezer overnight and then they will shrink a bit and be easier to knock into place. An angle grinder works a treat to help remove the old bearing off the steering stem. A combination of heat from cutting and cutting it off, and it will slide straight off before you even cut right through it. If you have a bit of metal tube or copper pipe slightly larger than the steering stem, this will work well to squarely knock the new bearing down into place. :thumbup:

(:-})
Not forgetting to put the dust cap on first :D :D :thumbup: :thumbup:

Re: what have you done to your "bike" today

Posted: Tue Jun 25, 2013 10:24 pm
by VTRDark
And to have the taper pointing in the right direction. :lol:

(:-})

Re: what have you done to your "bike" today

Posted: Tue Jun 25, 2013 10:26 pm
by AMCQ46
cybercarl wrote:And to have the taper pointing in the right direction. :lol:

(:-})
And don't mix and match the old and the new races and cages like Virts Hornet!

Re: what have you done to your "bike" today

Posted: Tue Jun 25, 2013 10:28 pm
by Virt
AMCQ46 wrote:
And don't mix and match the old and the new races and cages like Virts Hornet!
But it handled so good :lol: Totally didn't have loads of front end wobble or anything

Re: what have you done to your "bike" today

Posted: Tue Jun 25, 2013 11:45 pm
by lloydie
Removed the inlet restrictors from the exhaust headers .
Fitted new bushes to the forks but there's still a little lateral play !
Stanchion are fine so I'm thinking the lowers are oval . I will refit them tomorrow and see what they are like .
And took delivery of these
Image
So tomorrow I will show them up to the frog and have a think !!!

Re: what have you done to your

Posted: Tue Jun 25, 2013 11:56 pm
by agentpineapple
lloydie wrote:Removed the inlet restrictors from the exhaust headers .
Fitted new bushes to the forks but there's still a little lateral play !
Stanchion are fine so I'm thinking the lowers are oval . I will refit them tomorrow and see what they are like .
And took delivery of these
Image
So tomorrow I will show them up to the frog and have a think !!!
use the akra's and sell the quills to me on the cheap, you know it makes sense....lurvly jubbly..... :D

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 12:02 am
by darkember
AMCQ46 wrote:
cybercarl wrote:And to have the taper pointing in the right direction. :lol:

(:-})
And don't mix and match the old and the new races and cages like Virts Hornet!
No difficulty there as the old ones are prehistoric ball races type

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 12:02 am
by lloydie
I'm picking up the akrapovic on Sunday .
So Sunday night one set well be for sale not cheap mind but will be at cost . :-)

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 12:03 am
by AMCQ46
So were the ones on Virts bike !

Re: what have you done to your

Posted: Wed Jun 26, 2013 12:03 am
by agentpineapple
lloydie wrote:I'm picking up the akrapovic on Sunday .
So Sunday night one set well be for sale not cheap mind but will be at cost . :-)
and i thought you were my friend............. :cry:

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 12:09 am
by VTRDark
use the akra's and sell the quills to me on the cheap, you know it makes sense....lurvly jubbly..... :D
You have the TB's which are much better. It's just a shame they are not TI.

(:-})

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 12:11 am
by agentpineapple
cybercarl wrote:
use the akra's and sell the quills to me on the cheap, you know it makes sense....lurvly jubbly..... :D
You have the TB's which are much better. It's just a shame they are not TI.

(:-})
ssssssh!
i'm hoarding again..... :wink:
nah i'm just testing lloydie friendship, and he's failed terribly..... :roll:

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 12:18 am
by VTRDark
Don't worry, the sheep will get bored soon. :lol: :lol:

(:-})

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 8:21 am
by lloydie
cybercarl wrote:Don't worry, the sheep will get boned soon. :lol: :lol:

(:-})
Fixed :-)

Re: what have you done to your "bike" today

Posted: Wed Jun 26, 2013 8:23 am
by lloydie
agentpineapple wrote:
cybercarl wrote:
use the akra's and sell the quills to me on the cheap, you know it makes sense....lurvly jubbly..... :D
You have the TB's which are much better. It's just a shame they are not TI.

(:-})
ssssssh!
i'm hoarding again..... :wink:
nah i'm just testing lloydie friendship, and he's failed terribly..... :roll:
:ballkick:
A member already has first dibs on the set I sell . I will mark you down for seconds :-)