Page 54 of 1529
Re: what have you done to your "bike" today
Posted: Sun Nov 27, 2011 8:43 pm
by agentpineapple
i think it looks the nuts mate, i would consider smoked lenses tho so you would be hard pushed to see them until they are turned on, and as tony said unless you use your bike to commute in summer it should be ok, i'd love you to do a set for me mate........
even tho i've just sorted out a pair of original indicators with clear lenses, i would prefer your ones mate, good work.
Re: what have you done to your "bike" today
Posted: Sun Nov 27, 2011 8:56 pm
by tattoo
is this why the inner panels don't have a bottom to them,to direct air onto the top of the rads ?
Re: what have you done to your "bike" today
Posted: Sun Nov 27, 2011 9:16 pm
by tony.mon
Yes, exactly.
They aren't connected to the airbox intake, and so there isn't any other reason for them to have to have been put in, other than to feed air to the rads.
Re: what have you done to your "bike" today
Posted: Sun Nov 27, 2011 9:54 pm
by alec
Today i fitted H I D's to the tdm, tightened the chain, gave it a wipe over and fitted it all back together and went for a short ride, lights are excellent.
Re: what have you done to your "bike" today
Posted: Mon Nov 28, 2011 8:20 pm
by tattoo
tony.mon wrote:Yes, exactly.
They aren't connected to the airbox intake, and so there isn't any other reason for them to have to have been put in, other than to feed air to the rads.
tbh tony it did cross my mind at the time and on a quick test run today it did run quite abit hotter so the plastic plates coming out...might try mounting them on mesh instead,hopefully that'll let enough air flow through..
Re: what have you done to your "bike" today
Posted: Tue Nov 29, 2011 5:53 pm
by lloydie
thanks for the pics amcq46
picked my damper up today £10
as its a sprint damper im sending back to sprint in Nottingham for a full service £20
then when its back i will get it fitted
i had a look at the rhs fairing today and it already has the cut out for the damper so its had one fitted before
i just need to get a 45mm fork clamp now as the fireblade forks are bigger

Re: what have you done to your "bike" today
Posted: Wed Nov 30, 2011 2:55 pm
by Jazzscot
Fitted the exhausts that I got from lloydiecbr and took her for a wee run. It sounds nice and the Mrs said she could hear me coming along the road.
I now have a spare pair of round Art cans I might need to get rid of.

now to give her a wash.
Re: what have you done to your "bike" today
Posted: Wed Nov 30, 2011 3:25 pm
by agentpineapple
hi jazzscot i think one of the new members to the forum is looking for a pair of exhausts mate (scottyhatchi)
and lloydie you can get a 45mm clamp from sprint or there are lots of companies on ebay that sell them. also lloydie have you got the contact details for sprint because i have one of there dampers that needs servicing mate.....
what have you done to your "bike" today
Posted: Wed Nov 30, 2011 3:33 pm
by lloydie
Good work jazzcot they look good on a red one .
Bsm
I will be getting a clamp from eBay

Sprint damper uk ltd
Unit 8
Trent south ind park
Little tennis street
Nottingham
Ng2 4eq
Tel:0115 910 3247
Email :
info@sprintdampers.co.uk
Can't ride but it don't stop me trying
Re: what have you done to your "bike" today
Posted: Wed Nov 30, 2011 4:05 pm
by agentpineapple
cheers lloydie, i had to get a 50mm clamp for mine, i got it off of ebay, can't remember which company i got it from tho.
Re: what have you done to your "bike" today
Posted: Sun Dec 04, 2011 3:17 pm
by AMCQ46
Just finished fitting the heated grips and switch. I hate the look of the Oxford type heated grips on a sports bike, and as a result I have avoided the benefits of being able to feel my hands on the 1st and last rides of the year
I finally found the solution of having warm hands and sports grips using the Symtec heated grip kit. Which go under your normal grips
Then fitted some new dual compound Renthal grips on top
You can just see the heater wire beside the throttle cables
Then made up a switch bracket
Just waiting for the eastern beaver relay & harness to come in from Japan
http://easternbeaver.com/Main/Products/ ... grips.html
Very happy with the result from a fitting and looks, but havnt got the tank back on so no test runs.
Price of the heater kit is a bit high in uk at £43, especially when they are about $35 in USA, and I could have reused my standard Honda grips, but was time to refresh them anyway.
Re: what have you done to your "bike" today
Posted: Sun Dec 04, 2011 3:21 pm
by chric
What are the grips soft or medium and are they any better than originals.
Re: what have you done to your "bike" today
Posted: Sun Dec 04, 2011 3:26 pm
by AMCQ46
chric wrote:What are the grips soft or medium and are they any better than originals.
Soft on the top (the grey bit) and hard below the (black) and they feel a bit softer than std, and nice and grippy to touch.
As I said, I havnt been out to ride, and unless there is a dry day with no salt on the road, I won't be testing them till spring.
Re: what have you done to your "bike" today
Posted: Sun Dec 04, 2011 3:31 pm
by chric
Pity there not black though been looking on ebay and the soft i can only find in grey.Unless your know otherwise
Re: what have you done to your "bike" today
Posted: Sun Dec 04, 2011 3:42 pm
by agentpineapple
i've heard the soft renthal grips don't last very long, so it'll be interesting to see how you get on with them....
