VTR1000.ORG

agentpineapple wrote:

magnum wrote:Have you read my post on page 623.
Any way looking forward to meeting you all Saturday.

if you could bring the ct1 stuff mate, that would be great as I think I will end up with one of these
http://www.ebay.co.uk/itm/290961771234
cheers virt.....

No probs.

Dropped the forks out of mine and reverted back to 7.5wt fork oil and 140mm air gap.

The 10wt was great on normal road surfaces and undulations, but if you hit cats eyes or any high frequency roughness they just went solid and you lost front tyre grip.

There is defiantly a crack in the headers, so let's hope it hangs together for the workshop run.

Let's hope its back together for the workshop run or that's my weekend spoilt. The joys of buying another bike. Who knows when work will need doing massive thank you Lloyd for doing the work while your off top man

Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk

There is defiantly a crack in the headers, so let's hope it hangs together for the workshop run.

don't go over any speed bumps too fast.

(:-})

Ckennedy wrote:Let's hope its back together for the workshop run or that's my weekend spoilt. The joys of buying another bike. Who knows when work will need doing massive thank you Lloyd for doing the work while your off top man

Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk

You can always go on the back of me (pillion) if I can't be arsed to get it done

lloydie wrote:
You can always go on the back of me (pillion) if I can't be arsed to get it done

What happened to taking your eldest?

Or is there something you're hiding from us?

AMCQ46 wrote:Dropped the forks out of mine and reverted back to 7.5wt fork oil and 140mm air gap.

The 10wt was great on normal road surfaces and undulations, but if you hit cats eyes or any high frequency roughness they just went solid and you lost front tyre grip.

There is defiantly a crack in the headers, so let's hope it hangs together for the workshop run.

I have spare headers in a box !!! :-)






Not mori's standard !

Virt wrote:

lloydie wrote:
You can always go on the back of me (pillion) if I can't be arsed to get it done

What happened to taking your eldest?

Or is there something you're hiding from us?

When I told her you wasn't going she didn't want to either !!

cybercarl wrote:

There is defiantly a crack in the headers, so let's hope it hangs together for the workshop run.

don't go over any speed bumps too fast.

(:-})

It's the wheelies that's doing it !!!

agentpineapple wrote: cheers virt.....

http://www.ebay.co.uk/itm/Powerlink-Wea ... 1c3093a870

Here you go ol' buddy ol' pal

My dad wired his into his sidelights so it's only on with the ignition

Started to clean up the front header after seeing how AP,s were so shiny! Id love titanium but funds wont allow at the moment. Pleased with the new angle of the cans though and i believe that my new belly pan has arrived, i don't know whether to , or once its sprayed up thats it for the year just bloody ride it. Belgium next month.

lloydie wrote:

AMCQ46 wrote:Dropped the forks out of mine and reverted back to 7.5wt fork oil and 140mm air gap.

The 10wt was great on normal road surfaces and undulations, but if you hit cats eyes or any high frequency roughness they just went solid and you lost front tyre grip.

There is defiantly a crack in the headers, so let's hope it hangs together for the workshop run.

I have spare headers in a box !!! :-)






Not mori's standard !

cheers lloydie, i think they will survive till i get a set sent up from Mark.

a little more tinkering today, fitted some biketec preload agjusters, I also fitted some stompgrips and a pair of Germany's finest c/f engine covers, touched up a few stonechips.
i'm just waiting on some renthal grip glue for the left clip-on. fingers crossed my secret mod will be ready in time for Saturday....

agentpineapple wrote:a little more tinkering today, fitted some biketec preload agjusters, I also fitted some stompgrips and a pair of Germany's finest c/f engine covers, touched up a few stonechips.
i'm just waiting on some renthal grip glue for the left clip-on. fingers crossed my secret mod will be ready in time for Saturday....

It's just missing one thing...





















A good paint job

Got delivery of the Belly Pan, masked it up and rubbing down ready for spraying. New Mirrors arrived from China in 6 days, just amazing and they seem really good.Generator cover gasket came too. If its raining the weekend, i can get these bits fitted, if its dry, iam off out.