Storm gets a belly pan
- cunningstunt
- Posts: 81
- Joined: Thu May 27, 2010 3:33 pm
- Location: Norwich
Storm gets a belly pan
Just got round to fabricating some brackets to fit my £16 ebay belly pan! Total cost with paint and clear coat is £34 so not bad.
would make more use of a set of butt sliders these days
Re: Storm gets a belly pan
looks good matey, but get some wilko's BBQ black paint on those header pipes
4 wheels move the body, 2 wheels move the soul...........
- cunningstunt
- Posts: 81
- Joined: Thu May 27, 2010 3:33 pm
- Location: Norwich
Re: Storm gets a belly pan
I didn't think they were that bad but looking at that photo they look crap. Best get some paint on them or wrap them in heat foil
would make more use of a set of butt sliders these days
- benny hedges
- Posts: 6110
- Joined: Sun Oct 18, 2009 5:09 pm
- Location: Warrington
Re: Storm gets a belly pan
i quite like the cloth bandagy heat wrap tape - looks racymarravtr wrote:looks good matey, but get some wilko's BBQ black paint on those header pipes
nice belly tbh, looks good. simple and not overstated
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
-
- Posts: 105
- Joined: Sat May 15, 2010 12:26 pm
- Location: Surrey UK
Re: Storm gets a belly pan
Nice like that belly pan.
Have to get some BBQ paint on my exhaust lol !
Have to get some BBQ paint on my exhaust lol !
- cunningstunt
- Posts: 81
- Joined: Thu May 27, 2010 3:33 pm
- Location: Norwich
Re: Storm gets a belly pan
Already done! Pain in the butt taking the belly pan off again but it looks a lot better now. Should have done it before fitting it the first time round but never gave it a thought Doh!
would make more use of a set of butt sliders these days
Re: Storm gets a belly pan
That certainly looks better than the standard item IMHO
Chris.
Chris.
-
- Posts: 4
- Joined: Fri May 14, 2010 1:23 pm
- Location: Banbury - Oxfordshire
Re: Storm gets a belly pan
Hello mate, what indicators are they on your Storm?
I am struggling to find any to fit to the inner panel, as I am sure a lot of people do! If you adapted them to fit, how did you do it?
Cheers mate.
I am struggling to find any to fit to the inner panel, as I am sure a lot of people do! If you adapted them to fit, how did you do it?
Cheers mate.
If your not on the edge your taking up too much room!
Re: Storm gets a belly pan
taking the original off looks better than when its on, looking to get a Moriwaki replica from Skidmarx this spring.sirch345 wrote:That certainly looks better than the standard item IMHO
Chris.
- cunningstunt
- Posts: 81
- Joined: Thu May 27, 2010 3:33 pm
- Location: Norwich
Re: Storm gets a belly pan
Idicators are arrow type ones but have see through backs so you can see them from both ends of the bike. Rear ones were fitted into the standard holes and front were fitted by taking off the OE ones and removing the rubber mounts from the indicator arms and then putting the screw mount and rubber part of the new ones and a self tapper through the OE rubber into the rubber arm of the new ones then it all bolts back on and they are nearly flush with the fairing without cutting anything about. If you want a closer photo let me know and i'll post one up.
would make more use of a set of butt sliders these days