New user..Dynojet problems on my 2001 SuperHawk

dmxsoulja3 · Post by **dmxsoulja3** » Tue Mar 23, 2004 4:02 am

Hey everyone, glad I found this place

I have a 2001 SuperHawk 996, just bought it, 10k miles on it...has a Two brothers racing full exhaust, two brothers racing smog plugs, K&N air filter, and a Dynojet stage 1 kit...The original owner said that ever since the jet kit was installed, anything below 4k rpms was sloppy, the bike stumbles on itself, or if your trying to ride at a constant speed/throttle below 4k for highway driving it just kind bucks on me...can anyone suggest some settings to have my jets adjusted to? I'm in Florida, sea level...thanks alot guys.. Josh

SiJ · Post by **SiJ** » Tue Mar 23, 2004 8:12 pm

Try these settings

180 front jet
190 rear jet
circlip on needles 3rd position from bottom
2 turns out from seated on the pilots

I had this setting on my bike with a K&N and full akrapovic before i had the heads skimmed and ported and it ran fine....no flatspots.

I'll double check these settings tonight and let you know.