Few bits and bobs!
- Benno_0214
- Posts: 77
- Joined: Mon Oct 15, 2012 8:01 pm
- Location: Hereford
Few bits and bobs!
Since I got her late last year I've done a fair bit of cleaning and changing corroded fasteners for stainless ones.
I've done the stopper mod and given her a full service.
Other things I've done since:
Vfr 750 clip ons
Re painted forks and wheels
Rim tape
Renthal grips
Smaller indicators
Double bubble screen in black
Seat cowl (like rocking horse poo to find!)
Front brakes stripped and serviced.
Front and rear wheel bearings changed.
Next on the list will be some race cans (when I find some on eBay cheap:))
ugy8eme.jpg[/IMG]
Did you just high five me in the face?!?
- Benno_0214
- Posts: 77
- Joined: Mon Oct 15, 2012 8:01 pm
- Location: Hereford
Re: Few bits and bobs!
Did you just high five me in the face?!?
- Benno_0214
- Posts: 77
- Joined: Mon Oct 15, 2012 8:01 pm
- Location: Hereford
Re: Few bits and bobs!
Dunno why the picture wouldn't load before:/
Did you just high five me in the face?!?
Re: Few bits and bobs!
looks nice in black but red ones are faster
Re: Few bits and bobs!
Looks nice and clean Benno.
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Few bits and bobs!
very nice benno
i might be able to help you out with a pair of exhausts, i'm back in the uk in two weeks time, i'll drop you a line, nearer then...
i might be able to help you out with a pair of exhausts, i'm back in the uk in two weeks time, i'll drop you a line, nearer then...
HEY YOU GUYS!!!!!!
-
- Posts: 362
- Joined: Tue Feb 07, 2012 8:47 pm
- Location: Market harborough Leicestershire
Re: Few bits and bobs!
nice clean bike mate looks good
If sh1t were money you would be worth a fortune
Re: Few bits and bobs!
Nice and shiny but the chain looks like it needs oiling. You've got the same habit as me and forgetting about it. Or is it just the outside links a bit rusty.
(:-})
(:-})
==============================Enter the Darkside
- lloydie
- Posts: 20927
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Few bits and bobs!
Looks like the headers are the only thing that needs a clean up .
And I must say a very nice black one you have there
And I must say a very nice black one you have there
- Benno_0214
- Posts: 77
- Joined: Mon Oct 15, 2012 8:01 pm
- Location: Hereford
Re: Few bits and bobs!
Chain looks rusty in the pic but its actually cos its a gold one,I see why you'd think that!;)
Yeah when the weather gets a bit better will have a good go at the headers, try and shine em up!:)
Yeah when the weather gets a bit better will have a good go at the headers, try and shine em up!:)
Did you just high five me in the face?!?
- Benno_0214
- Posts: 77
- Joined: Mon Oct 15, 2012 8:01 pm
- Location: Hereford
- BigVeeGrin
- Posts: 2516
- Joined: Wed Feb 17, 2010 1:41 pm
- Location: Glasgow
Re: Few bits and bobs!
looks like mine should Benno
what were the indies you put on, where from and do you rate them?
what were the indies you put on, where from and do you rate them?
- Benno_0214
- Posts: 77
- Joined: Mon Oct 15, 2012 8:01 pm
- Location: Hereford
Re: Few bits and bobs!
I got the indicators from demon tweeks, they are the clear ones, used the longer stem ones for the front and the shorter ones on the back, I had to pack out the front ones with a couple M8 washers so they weren't touching the fairing. I chopped the numberplate bracket down while I was at it.
http://www.demon-tweeks.co.uk/motorcycl ... indicators
http://www.demon-tweeks.co.uk/motorcycl ... indicators
Did you just high five me in the face?!?