Exhaust heat wrap

General Bike chat
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Exhaust heat wrap

Post by Watty »

Thought about heat wrapping exhaust from rear cylinder to keep some heat away from rear shock and linkage! Any thoughts? Has it been tried? Pro's & cons? Would both pipes have to be done? Cheers, Watty.
SH#T HAPPENS!!!!!!!!
User avatar
Wicky
Posts: 7895
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:

Re: Exhaust heat wrap

Post by Wicky »

It is a fashion to do in the hotter US states but English weather esp winter makes a mess of it.
It may be that your whole purpose in life is simply to serve as a warning to others.

ImageVTR Firestorm and other bikes t-shirts
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Exhaust heat wrap

Post by agentpineapple »

a few have done it, but not many shout about its benefits. the wrap can get tatty quickly, theres a spray you can use to help protect it from grime. give it a go and let us know how it turns out.... :thumbup:
HEY YOU GUYS!!!!!!
User avatar
fabiostar
Posts: 7613
Joined: Sat Jun 01, 2013 3:53 pm
Location: sunny belfast

Re: Exhaust heat wrap

Post by fabiostar »

for race use yes. for road use I wouldn't bother. it has a habbit of making stainless pipes go brittle..
the older i get,the faster i was :lol:
whitestorm pete
Posts: 362
Joined: Tue Feb 07, 2012 8:47 pm
Location: Market harborough Leicestershire

Re: Exhaust heat wrap

Post by whitestorm pete »

iv used it it on my storm just because i couldnt get any paint to stick to me headers ! i would say if you do go for it soak the wrap in water and wear thick gloves as it will soon make a mess of your hands :thumbup:
If sh1t were money you would be worth a fortune
User avatar
E.Marquez
Posts: 635
Joined: Wed May 30, 2012 1:27 pm

Re: Exhaust heat wrap

Post by E.Marquez »

DO you all have shops there that do ceramic coat? (same process as powder coating, just a different material used)

You get the benefits of header wrap, without the downsides.
Marquez Motorcycle Services
Solutions to recurring maintenance
Race/Adventure ride event prep
Post event services

Total Rider
Your path to a TX motorcycle license
And advanced Rider training
User avatar
Watty
Posts: 5583
Joined: Sat Apr 20, 2013 11:35 pm
Location: Barnard Castle, Co. Durham.

Re: Exhaust heat wrap

Post by Watty »

Some mixed feelings to think about there! Cheers for thoughts :D
SH#T HAPPENS!!!!!!!!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Exhaust heat wrap

Post by VTRDark »

DO you all have shops there that do ceramic coat?
Ceramic coating is an option but not cheap.

(:-})
==============================Enter the Darkside
User avatar
thumperslaw
Posts: 1209
Joined: Thu Nov 24, 2011 7:14 pm
Location: oxford

Re: Exhaust heat wrap

Post by thumperslaw »

cybercarl wrote:
DO you all have shops there that do ceramic coat?
Ceramic coating is an option but not cheap.

(:-})
Been thinking about wrap for a long time now. As nice as it looks i would not do it

On the other hand Am going down the Ceramic coating route which cost just over a £100 for the vtr. This is black coating by the way
98 storm with goodies!

Srad seven fiddy stuntbike

K100 "flying brick"

R.I.P engine number 5
User avatar
gl_s_r
Posts: 546
Joined: Thu Nov 13, 2008 8:57 am
Location: Kent

Re: Exhaust heat wrap

Post by gl_s_r »

Where you getting it done for £100, most of the quotes I have had back are around £200-£250 depending on colour for the headers..That was a proper plasma sprayed process.
Why ask... sometime you just go to do it and find out?
User avatar
Nickcv
Posts: 101
Joined: Tue May 07, 2013 1:29 pm
Location: Tonbridge, Kent
Contact:

Re: Exhaust heat wrap

Post by Nickcv »

I recently sold a CX500 cafe racer I'd built and wrapped the exhausts. After a good run I could grab hold of the exhaust headers and they simply felt warm.
Roger Ditchfield
Posts: 181
Joined: Tue Apr 26, 2011 6:55 pm

Re: Exhaust heat wrap

Post by Roger Ditchfield »

Fully wrapping the exhausts pipes as far as the canisters on a racing VTR can give as much as 4bhp :D
It was eventually banned by the FIM and ACU for racing around '98 because if there is any oil leakage/spillage or even oily hands from careless trackside mechanics the pipes begin to smoke which alarmed trackside marshals and following riders who believed the engine was about to blow up. Probably a wise decision. Up to the date of the ban Revolution Racing general lagged all its racing exhaust pipes on Twins and Triples or at least the first 12" of header pipes on Fours like the CBR600.
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Exhaust heat wrap

Post by agentpineapple »

thanks for the info roger, the bhp chasers will be rushing out to buy exhaust heat wrap as we speak............. :lol:
HEY YOU GUYS!!!!!!
User avatar
gl_s_r
Posts: 546
Joined: Thu Nov 13, 2008 8:57 am
Location: Kent

Re: Exhaust heat wrap

Post by gl_s_r »

I still like the ceramic option and close to having it done but still waiting to see where I can get it the £150 cheaper...
Why ask... sometime you just go to do it and find out?
User avatar
thumperslaw
Posts: 1209
Joined: Thu Nov 24, 2011 7:14 pm
Location: oxford

Re: Exhaust heat wrap

Post by thumperslaw »

gl_s_r wrote:I still like the ceramic option and close to having it done but still waiting to see where I can get it the £150 cheaper...
http://www.camcoat.u-net.com/Exhtprices2002.htm

They are the people i spoken to about pircing for the VTR :wink:

Old pricing is still the same
98 storm with goodies!

Srad seven fiddy stuntbike

K100 "flying brick"

R.I.P engine number 5
Post Reply