Value of exhausts

General Bike chat
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Value of exhausts

Post by Shauned71 »

Hey hey.. looking to extract some expert advice from you guys :wink: I am looking to slowly move over from working on cars for a living to just working on bikes be it breaking a few bikes, doing some shot blasting on parts or polishing, buy tidy up and sell or paintwork/repairs. Got to start somewhere so... bought a hi mileage storm a few weeks back which i was going to use as my run about until i fix my own bike up but have decided to break it, it will be a couple of weeks before i have time to take it apart properly but I have a few bits off it already which i'm looking to sell on. Because I bought another storm i need to get some money back in, sold a few bits already but the one thing i'd like your thoughts on.. what do you think the exhaust is worth? Was thinking of offering it on here and fb pages etc but was also thinking about putting on ebay. Obviously I want to make money but at the same time, hoping that this will develop into more than just one bike I want to try and be selling tidy items at a reasonable price as well.... there are enough robbing gits within the motor trade already and i don't want to be one of them :lol:

Few photos below... no dents that i can see or scraps.. will be giving them a good machine polish up before advertising too. Only fault i can see... i'm guessing they are guards as in heat shields on the link pipes, one has parted company. Was also wondering if better to sell links separate to cans :think: Cans would come with straps, but the hangers as in photo's are just homemade and not very nice at all.

Any thoughts are appreciated.

Image

Image

Image

Image

Image
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Value of exhausts

Post by bigtwinthing »

The link pipes are worth about £90 i reckon. Cans do seem a tad long!!! but they will sell iam sure. put them up for £140.00 glws
missing the noise, not the vibes. However never say never!
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Value of exhausts

Post by agentpineapple »

because of the minor damage to the linkpipe and the hangers being some what homemade, also the cans are round and not oval, but that's a personal thing, I reckon £150, or you could split them and try to make more money, if they were mint and oval, it would be very close to £200.
HEY YOU GUYS!!!!!!
NZSpokes
Posts: 643
Joined: Sat May 31, 2014 10:50 am
Location: Auckland, New Zealand

Re: Value of exhausts

Post by NZSpokes »

I would like the gold wheels...
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Value of exhausts

Post by Shauned71 »

NZSpokes wrote:I would like the gold wheels...
I dont usually like gold wheels.. but quite like the colour of these ones, it's a shame they have a horrible paint job :(
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Value of exhausts

Post by Shauned71 »

Just a thought.. wonder if these would be worth more or less, I can swap my scorpion cans for a pair of remus oval cans. The remus are straight with no nasty scraps etc, only mark is on one can and it's from the strap. Wondering if putting the ovals with the high links would be more attractive :think:
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Value of exhausts

Post by Shauned71 »

Took the exhaust off this afternoon... cans are clean but there are a few small dings... slight ripple on one can which is covered by the strap (looks like the strap caused it) and 2 small dings (1 on each can) at the rear end on inside.
Also.. found this link on another post http://www.ebay.co.uk/itm/Honda-VTR1000 ... 7675.l2557 I got the chance to swap the cans themselves for some oval remus which I fancy for my bike so figure if links go for that price then i'll split this lot up. Besides where the one heat guard has come off the pipes are good and i'm sure if someone wanted to make the effort they could grind the little spot welds off and polish them up too. £112 posted for the ones linked above on Ebay so dont think £90 is a bad price for mine delivered. If anyone interested give me a shout... I will ofc stick a post in the sales section.
tony.mon
Posts: 16313
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Value of exhausts

Post by tony.mon »

Seems like you're trying to make a silk purse out of a sow's ear with the faults listed.
Good luck, though.
it's hard enough trying to start a business.
It's not falling off, it's an upgrade opportunity.
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Value of exhausts

Post by Shauned71 »

tony.mon wrote:Seems like you're trying to make a silk purse out of a sow's ear with the faults listed.
Good luck, though.
it's hard enough trying to start a business.

Thanks for the good luck :thumbup: Also, and I must be missing something here... silk purse pigs ear.. eh? I yes I know what the saying means but don't see where it applys to me.
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Value of exhausts

Post by Shauned71 »

How'd you like me now :wink:

Image

Image
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Value of exhausts

Post by agentpineapple »

looks like you can make a silk purse....... :thumbup: :lol: :lol: :lol: :lol: :lol:
HEY YOU GUYS!!!!!!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Value of exhausts

Post by VTRDark »

Stick to painting :lol: That's not shiny, this is shiny.
http://www.vtr1000.org/phpBB3/viewtopic ... sh#p321929

I can still see the machine marks on the links. It's that eagle eye again!! and if I can see it in pics which hide stuff, what's it like in the flesh. They look better than what they where to begin with but add no value, just saleability.

(:-})
==============================Enter the Darkside
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Value of exhausts

Post by agentpineapple »

cybercarl wrote:Stick to painting :lol: That's not shiny, this is shiny.
http://www.vtr1000.org/phpBB3/viewtopic ... sh#p321929

I can still see the machine marks on the links. It's that eagle eye again!! and if I can see it in pics which hide stuff, what's it like in the flesh. They look better than what they where to begin with but add no value, just saleability.

(:-})
way to piss on someones hard work carl..... :roll:
HEY YOU GUYS!!!!!!
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Value of exhausts

Post by bigtwinthing »

agentpineapple wrote:
cybercarl wrote:Stick to painting :lol: That's not shiny, this is shiny.
http://www.vtr1000.org/phpBB3/viewtopic ... sh#p321929

I can still see the machine marks on the links. It's that eagle eye again!! and if I can see it in pics which hide stuff, what's it like in the flesh. They look better than what they where to begin with but add no value, just saleability.

(:-})
way to piss on someones hard work carl..... :roll:
+1 :lol: Carl you Flattering b8stard :lol: The guys fingers are down to the bone, and you've sent him over the edge :lol:
missing the noise, not the vibes. However never say never!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Value of exhausts

Post by VTRDark »

Am I being too picky, I see it at constructive criticism. Sorry Shaun.

I must remember to not speak my mind. :lol:

(:-})
==============================Enter the Darkside
Post Reply