Harris Ti cans:
Posted: Tue Sep 02, 2014 10:06 pm
Anybody seen these beauties before?
Are they for your track bike then. Very nice, not seen TI Harris cans for the Storm before.
(:-})
Page 1 of 3
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:11 pm
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:12 pm
Were they the ones on E Bay?
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:14 pm
Yeah spotted them on the bay, surely they can't be Firestorm cans?!
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:17 pm
Not by the angle of the link pipes but nice cans
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:17 pm
Why not?
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:19 pm
They just look a bit non-firestormy 
I'll find out in a few days
I'll find out in a few days
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:20 pm
Fingers crossed 
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:27 pm
They look like Storm links to me. The cans are a bit short but IIRC Harris cans are a bit on the short side.
(:-})
(:-})
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:40 pm
Sweet 
Can't wait, they might even make their way on to the black bike. I made him a silly offer and got them!
They're not Mori pedigree but, a bit classier than the Art cans I have now
Can't wait, they might even make their way on to the black bike. I made him a silly offer and got them!
They're not Mori pedigree but, a bit classier than the Art cans I have now
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 10:47 pm
Re: Harris Ti cans:
Posted: Tue Sep 02, 2014 11:24 pm
Very nice
I'm amazed they cleaned up so well! They looked really tired in the "before" pic.
Really can't afford these Harris cans, but sod it I'll do some overtime
I'm amazed they cleaned up so well! They looked really tired in the "before" pic.
Really can't afford these Harris cans, but sod it I'll do some overtime
Re: Harris Ti cans:
Posted: Wed Sep 03, 2014 12:42 am
I'm pretty sure those were for sale on ebay a few months again, nice looking cans
Re: Harris Ti cans:
Posted: Wed Sep 03, 2014 8:26 am
I was tired when I finished them...Jamoi wrote:Very nice
I'm amazed they cleaned up so well! They looked really tired in the "before" pic.
Really can't afford these Harris cans, but sod it I'll do some overtime
Re: Harris Ti cans:
Posted: Wed Sep 10, 2014 8:31 pm
I finally got my grubby mitts on the cans...
Thankfully my concerns proved pointless as they are definitely Firestorm cans
Fitted after work using lots of gasket sealant on the graphite seals as they were quite squashed/worn, must get a load on order as my system is blowing air all over the place
Went for a good blast!
Despite the "not for road use" stamp on the Harris cans, they are much quieter than my recently repacked Art carbon cans!
Bottom end power feels a bit weaker, as in there's not much going on under 6k, then it takes off like a scalded cat! Strange really as there's not much difference in length and outlet diameter between the Art & Harris cans.
Need to tweak my air/fuel thumbscrews I think, when I removed the baffles from my Art cans the left baffle came out stripped of any carbon deposits (cleaner than when it went in) and the right hand baffle was black and carbon clad. This is since replacing my seized stock screws with the neat little thumbscrews.
Thankfully my concerns proved pointless as they are definitely Firestorm cans
Fitted after work using lots of gasket sealant on the graphite seals as they were quite squashed/worn, must get a load on order as my system is blowing air all over the place
Went for a good blast!
Despite the "not for road use" stamp on the Harris cans, they are much quieter than my recently repacked Art carbon cans!
Bottom end power feels a bit weaker, as in there's not much going on under 6k, then it takes off like a scalded cat! Strange really as there's not much difference in length and outlet diameter between the Art & Harris cans.
Need to tweak my air/fuel thumbscrews I think, when I removed the baffles from my Art cans the left baffle came out stripped of any carbon deposits (cleaner than when it went in) and the right hand baffle was black and carbon clad. This is since replacing my seized stock screws with the neat little thumbscrews.