Repairs to carbon

WayneM · Post by **WayneM** » Mon Feb 03, 2003 6:16 pm

Hi all

Im looking for someone to repair a couple of cracks in my carbon/kevlar fairing. Extreme Performance in the Weighbridge area have been recommended but I cant find them on the net. Anyone know them and/or have a contact number for them?

Alternatively, anyone know someone down sauf that can do the job.

Cheers
Wayne

Post by **firestorm_al** » Mon Feb 03, 2003 8:29 pm

I know they are a bit "up North" but you could try either ART or QBCarbon ( http://www.qbcarbon.com ) both up in Nottingham.

Al.

delmeekc · Post by **delmeekc** » Wed Feb 05, 2003 11:34 am

Wayne,

I can probably get it done for ya, depends how bad it is.

Del.

WayneM · Post by **WayneM** » Wed Feb 05, 2003 2:35 pm

Really! Bloody hell Del! Is there no end to your talents?!?!?

Its not to bad at all - hardly noticeable actually. Happened when the bike fell off the paddock standand hit the garage wall. The point of contact was the out side edge of the screen so it essentially bent the fairing at the point just above the mirrors. Also a little crack around the indicator but again hardly noticeable. Probably easiest if I bring the bike over for you to take a look.

I also have a new PFM carrier and a new left foot peg hanger to go on, do you fancy doing those for me as well? Id rather give you the cash then the Honda Garage.

Anyway, let me know when your available and get the missus to put the kettle on

Cheers

delmeekc · Post by **delmeekc** » Wed Feb 05, 2003 8:24 pm

ok,

i'm free after 4pm and weekends (all day) for the next 2 1/2 weeks then i am back on shift so get in quick mate.

Del

WayneM · Post by **WayneM** » Sat Feb 08, 2003 4:18 pm

Hi Del,

I'm at work all this weekend now (boohoo!)

Can I set a definate date for next weekend - Saturday or Sunday which ever is good for you.

Also I want to get the little one something - are we talking about a little man or a little lady?

Cheers

WayneM · Post by **WayneM** » Sat Feb 08, 2003 8:14 pm

Hi Del

Another job for you!

The filler cap hole in the top of my carbon tank needs cutting to make bigger. Is that something you could do for me?

Cheers

delmeekc · Post by **delmeekc** » Sun Feb 09, 2003 6:12 pm

saturday would be cool, let us know exactly what needs doing incase i have to get some bits, can probably do the hole in the tank too. Taylor ( is a boy) a noisy one too. Just wait until he's big enough to ride a mini moto, i think i will have to buy him one then, i can have a go too.

Del.

WayneM · Post by **WayneM** » Sun Feb 09, 2003 10:43 pm

Hi Del

List of jobs for you!
Replace left front disc carrier
Replace left hanger
Have a look at the fairing cracks to see if you can repair
Have a look at the tank (if I can bring it!)

Cheers big boy

delmeekc · Post by **delmeekc** » Mon Feb 10, 2003 11:51 am

Wayne,

your running PFM's?

is that the rider footpeg hanger?

bring the carbon tank anytime mate.

Del.

WayneM · Post by **WayneM** » Mon Feb 10, 2003 4:23 pm

Good point!

Yep PFMs
Yep rider foot peg

Cheers
Wayne

delmeekc · Post by **delmeekc** » Mon Feb 10, 2003 5:07 pm

Wayne,

can ya get here say early ish, about 9 or somit, can get stuck in then early.

I take it you have the disk rotor and the footpeg hanger, I have new bolts for the calipers in stock. I checked and they are the same as mine. For the rear dya want all the bearings greased up or just the hanger replacing. Could grease all the bearings and clean all the dust seals for all bearings and both wheels whilst it's in bits. It's up to you really, depends how long you have and how many cups of tea you can drink.

Del.

WayneM · Post by **WayneM** » Mon Feb 10, 2003 5:26 pm

I'll go for the full monty please matey! Assuming Jen doesnt say "Hello Wayne, nice to see you again. You can only stay for 2 hours this time then you have to leave or die!!!!"

Will a cheque be ok or would you prefer cash. If cash, let me know how much and I'll make sure I come stashed, as it were!

Early wont be a problem.

Cheers fella
Wayne

delmeekc · Post by **delmeekc** » Mon Feb 10, 2003 5:37 pm

Wayne,

I cheque will be fine mate. I'll just give her a slap if she starts ( oh I am a dreamer)

Del.