Page 2 of 2

Ok we have a slight problem

Posted: Sun Nov 18, 2018 12:01 am
by Karnos
Hi guys
Put her in for an MOT today and she failed with a front warped disc,
So I am at the point of having to replace the discs,can't post in wanted yet so asking here what discs off of what bikes will fit.
Am on a tight budget at moment so if any of you lovely people have a pair of discs for sale please shout me up.
As I said budget is a bit tight so be kind lol.
I believe only the standard VTR 1000 F discs will fit not sp1 or 2 if i'm wrong please let me know.

Re: Just to say hello and thank's for the invite

Posted: Sun Nov 18, 2018 7:23 am
by MacV2
Sorry to be the bringer of bad news but the disc are peculiuer to the Storm...

Use this handy site to find the part number...

https://www.bike-parts-honda.com/

Link to VTR page... https://www.bike-parts-honda.com/honda- ... 0-MOTO/VTR

Go to the relevent page...in this case Front Wheel...

https://www.bike-parts-honda.com/honda- ... 00/2/11520

Locate the part number in the side list... No's 9 & 10...The discs are handed so you need two part numbers...

Click on the part number & is sends you here & this shows you what bikes the part is common with.

https://www.bike-parts-honda.com/honda- ... 5120MBBD41

The discs as shown only fit the Storm...

Below this link shows the difference with another part...front brake switch...

https://www.bike-parts-honda.com/honda- ... 5340MM5600

Re: Just to say hello and thank's for the invite

Posted: Sun Nov 18, 2018 7:41 am
by MacV2
Check your PM's

:thumbup:

Re: Just to say hello and thank's for the invite

Posted: Sun Nov 25, 2018 5:08 pm
by Karnos
Just a little up date.
A Huge thank's very very nice man by the name of MacV2 was able to supply me with the much needed replacement discs and a ton of info for the fitting procedure which made the job very straightforward.
Also after a lot of faffing with the led indicators,which I ended up ripping off and replacing with standard bulb mini's still thought they were bloody strobe lights!!
Put the led relays inline and they slowed to a sensible pace? Makes me think maybe the relay is the wrong one.
Still,back to the Mot blokey after work tomorrow and she should be sorted.
Now where did I see those high level pipes for sale :lol:

Re: Just to say hello and thank's for the invite

Posted: Sun Nov 25, 2018 6:05 pm
by MacV2
:thumbup: