problem!! resetting timing

stormstreeter · Post by **stormstreeter** » Sat Aug 25, 2007 8:14 pm

i am resetting the timing on the front cylinder but not sure on witch fi fe marks to use because i have both on each sprocket for the first cam which one of the 2 fe or fi do i use to line up wiv the rocker cover side bit!! please help meee

VTRbob · Post by **VTRbob** » Sat Aug 25, 2007 9:32 pm

the fi is front inlet(inlet cam) & fe is front exhaust(exhaust cam) thems the ones to use m8

Post by **sirch345** » Sat Aug 25, 2007 10:53 pm

The camshaft nearest the exhaust header on the front cylinder will use the FE mark. The camshaft nearest the carb on the front cylinder will use the FI mark,

Chris.

stormstreeter · Post by **stormstreeter** » Sun Aug 26, 2007 5:09 pm

thank you, its now all sorted and running better without missfire but seems not that powerful at very high revs, i have no experience of v twin bikes only had it a week, does all the power come at low revs or does it continue to redline/ cheers,