VTR1000.ORG

Check your chain tension, is it too tight ? is there a tight spot ? Check to see if the front sprocket is worn and the rest of the chain and sprockets. check rear sprocket carrier bearing All these are to do with the final drive, I would check everything here first before anything else. . Hello, th...

Hello everyone. I have a problem with the change of gears, when passing from first speed to second makes a noise similar to "clonk" considerable. I changed the engine oil, sae 10w40 mineral, I also changed the seals of the clutch and hydraulic piston pump, new transmission kit, it has imp...

Hello everyone. I have a problem with the change of gears, when passing from first speed to second makes a noise similar to "clonk" considerable. I changed the engine oil, sae 10w40 mineral, I also changed the seals of the clutch and hydraulic piston pump, new transmission kit, it has impr...

Good job. Does it have space for the ignition to clear the clocks? hello, these days I have had work and I have not been able to work on the project of the handlebars. Yesterday I received the new handle, it has a different shape than the one shown in the photos. I touched the clutch pump on the fo...

Gentlemen in the end fit. I have had some problem but the result seems satisfactory. I have the doubt that handlebar place and solve all the rest, brake pump, switches etc. Hope you like. a greeting. I will upload photos when I have the rest of the material https://uploads.tapatalk-cdn.com/20180104/...

To avoid cutting lots off your faring you need to keep the rise of the yoke and the new bars fairly low. As you see Nellie I got the bar clamps just over 1" above the yoke then I used rental ultra low super bike bars. They do a true flat bar which has zero rise and only a sweep back. https://u...

If this works, I'd imagine it being an early candidate for Vtr modification of the year 2018 [emoji106] Will the lower yoke fit also? It might be a stronger item than the oem Honda one [emoji106] Good luck [emoji106] Hi. At the moment the only problem is to make the central hole a little larger, fr...

If this works, I'd imagine it being an early candidate for Vtr modification of the year 2018 [emoji106] Will the lower yoke fit also? It might be a stronger item than the oem Honda one [emoji106] Good luck [emoji106] Hi. At the moment the only problem is to make the central hole a little larger, fr...

To avoid cutting lots off your faring you need to keep the rise of the yoke and the new bars fairly low. As you see Nellie I got the bar clamps just over 1" above the yoke then I used rental ultra low super bike bars. They do a true flat bar which has zero rise and only a sweep back. https://u...

To avoid cutting lots off your faring you need to keep the rise of the yoke and the new bars fairly low. As you see Nellie I got the bar clamps just over 1" above the yoke then I used rental ultra low super bike bars. They do a true flat bar which has zero rise and only a sweep back. https://u...

To avoid cutting lots off your faring you need to keep the rise of the yoke and the new bars fairly low. As you see Nellie I got the bar clamps just over 1" above the yoke then I used rental ultra low super bike bars. They do a true flat bar which has zero rise and only a sweep back. https://u...

I don't have any problems with the handling after the conversion, I have reduced teh preload on the front forks slightly and dropped them in the yokes to get more weight onto teh front wheel and it works great. the only thing you need to learn is to have a lighter grip on the bars as you have so mu...

I don't have any problems with the handling after the conversion, I have reduced teh preload on the front forks slightly and dropped them in the yokes to get more weight onto teh front wheel and it works great. the only thing you need to learn is to have a lighter grip on the bars as you have so mu...

I don't have any problems with the handling after the conversion, I have reduced teh preload on the front forks slightly and dropped them in the yokes to get more weight onto teh front wheel and it works great. the only thing you need to learn is to have a lighter grip on the bars as you have so mu...

I don't think I have heard anyone using a bandit top yoke, but it looks like it will be close, so best action is what you described ... put it on and try. the biggest problem doing a flatbar yoke for the firestorm is the fact that the forks stick a long way up through the yokes when you take off th...