Search found 55 matches
- Sun Apr 27, 2014 4:03 am
- Forum: Workshop
- Topic: Fuel enrichener
- Replies: 10
- Views: 258
Re: Fuel enrichener
Greetings Are these what your looking for? http://www.vtr1000.org/phpBB3/viewtopic.php?f=9&t=25686&p=220643&hilit=choke+brass#p220675 Yes they are thank you! Unfortunately due to me being so new to this forum i am unable to private message him at this time to see if he still sells them ...
- Tue Apr 22, 2014 3:34 pm
- Forum: Dodgy Dealers, Cheapest , Best Service etc..
- Topic: Bill at HPower & velocity stacks
- Replies: 12
- Views: 3205
Re: Bill at HPower & velocity stacks
bought a set of the Velocity stacks for the storm from Bill at HPower and it was a very pleasant transaction! Bill is highly knowledgeable in regards to the VTR and gave me loads of good tips in regards to the stacks and the storm in general. Really top notch service over there and i highly recomme...
- Mon Apr 21, 2014 7:21 am
- Forum: Workshop
- Topic: Reference - Linkage Bearing, Seal Sizes and Part Number
- Replies: 11
- Views: 1476
Re: Reference - Linkage Bearing, Seal Sizes and Part Number
thunderbolt wrote:Kit, you had the oil/dust seal on your reference file above as number 19 on the diagram, but No. 19 on both Ron Ayers and Partzilla is a dowel.
I'm a cockeyed sod!!
- Sun Apr 20, 2014 1:53 pm
- Forum: Workshop
- Topic: Reference - Linkage Bearing, Seal Sizes and Part Number
- Replies: 11
- Views: 1476
Re: Reference - Linkage Bearing, Seal Sizes and Part Number
Partzilla is fine except that shipping is based on cost I.e usd40 shipping cost for anything purchased up to usd100 after which it goes up. Parts can take sometime to arrive as they have to order parts from American Honda. I use only as a last resort when I can't get parts elsewhere.
Kit
Kit
- Sun Apr 20, 2014 11:02 am
- Forum: Workshop
- Topic: Reference - Linkage Bearing, Seal Sizes and Part Number
- Replies: 11
- Views: 1476
Re: Reference - Linkage Bearing, Seal Sizes and Part Number
References mostly from US sites
http://www.ronayers.com/REAR-SHOCK-ABSO ... 75558.aspx
And from Partzilla ( which I've bought from)
http://www.partzilla.com/parts/search/H ... parts.html
Kit
http://www.ronayers.com/REAR-SHOCK-ABSO ... 75558.aspx
And from Partzilla ( which I've bought from)
http://www.partzilla.com/parts/search/H ... parts.html
Kit
- Sat Apr 19, 2014 10:26 am
- Forum: Workshop
- Topic: wanna replace my fairings and...
- Replies: 9
- Views: 593
Re: wanna replace my fairings and...
i think im going to try and see if i can salvage my current set. do a complete strip down and fix whatever cracks i can. then prep and paint. we will see how things turn out. prolly gonna keep her white :D thought about black but it would just be too black with the wheels and everything. ill update...
- Sat Apr 19, 2014 10:20 am
- Forum: Workshop
- Topic: Reference - Linkage Bearing, Seal Sizes and Part Number
- Replies: 11
- Views: 1476
Reference - Linkage Bearing, Seal Sizes and Part Number
For the complete replacement of the suspension linkage needle bearings and seals you need:- 4 needle bearings Honda part number 91072-KT7-003 item number 17 of size 17x24x20 1 needle bearing Honda part number 91071-KV3-005 item number 20 and of size 17x24x25 6 dust seals Honda part number 91262-KV3-...
- Sat Apr 19, 2014 10:05 am
- Forum: Workshop
- Topic: Glad I pulled the Back End Off the Bike
- Replies: 19
- Views: 1391
Re: Glad I pulled the Back End Off the Bike
Found it!!!
4 needle bearings 91072-KT7-003 number 17 of size 17x24x20
1 needle bearing 91071-KV3-005 number 20 and of unstated size = 91071-KV3-005 17x24x25
We've got to store this somewhere so its easy to search. I'll post it up with the appropriate headings.
Kit
4 needle bearings 91072-KT7-003 number 17 of size 17x24x20
1 needle bearing 91071-KV3-005 number 20 and of unstated size = 91071-KV3-005 17x24x25
We've got to store this somewhere so its easy to search. I'll post it up with the appropriate headings.
Kit
- Sat Apr 19, 2014 9:22 am
- Forum: Workshop
- Topic: Glad I pulled the Back End Off the Bike
- Replies: 19
- Views: 1391
Re: Glad I pulled the Back End Off the Bike
Ok i checked the parts list. In the event i choose to replace all the bearings i would need:- 4 needle bearings 91072-KT7-003 number 17 of size 17x24x20 1 needle bearing 91071-KV3-005 number 20 and of unstated size. So anyone know the size of the needle bearing with part number 91071-KV3-005 as stat...
- Sat Apr 19, 2014 8:53 am
- Forum: Workshop
- Topic: Glad I pulled the Back End Off the Bike
- Replies: 19
- Views: 1391
Re: Glad I pulled the Back End Off the Bike
By the way what size is the dog bone link bearing?
Kit
Kit
- Sat Apr 19, 2014 8:49 am
- Forum: Workshop
- Topic: Glad I pulled the Back End Off the Bike
- Replies: 19
- Views: 1391
Re: Glad I pulled the Back End Off the Bike
What's the mileage on the bikes before the bearing goes? Anyone got any data on this?
Kit
Kit
- Mon Apr 14, 2014 5:03 am
- Forum: Workshop
- Topic: Bleeding hydraulics
- Replies: 3
- Views: 172
Re: Bleeding hydraulics
The clutch reservoir is pretty small though and I managed to empty it a couple of times and got air into the system. No big deal though, as using the syringe method i managed to suck up the air out right quick.
Kit
Kit
- Sun Apr 13, 2014 7:22 am
- Forum: Workshop
- Topic: Bleeding hydraulics
- Replies: 3
- Views: 172
Bleeding hydraulics
Hi Guys Decided to bleed all my hydraulics (clutch and brakes) yesterday. The clutch hydraulics came out black something awful. Previous owner never did change the fluid IMHO. Since I was working on my own, i fashioned up a solo hydraulic bleed tool which worked extremely well and I thought I'd shar...
- Sun Mar 23, 2014 4:36 pm
- Forum: Workshop
- Topic: Shim sizes
- Replies: 21
- Views: 879
Re: Shim sizes
I would do those 2 "borderline" cases any if i were you. the cams are coming off for the others and you might as well get it done all at once.
kit
kit
- Wed Mar 19, 2014 11:36 pm
- Forum: Workshop
- Topic: Original Silencer Mounting position
- Replies: 4
- Views: 682
Re: Original Silencer Mounting position
Thanks mate!
That's what I thought and how i fitted the OEM silencers.
However, when i looked through the Factory Workshop Manual, it got me confused and looked like the silencers were fitted inboard for the front and outboard for the rear.
Kit
That's what I thought and how i fitted the OEM silencers.
However, when i looked through the Factory Workshop Manual, it got me confused and looked like the silencers were fitted inboard for the front and outboard for the rear.
Kit