VTR1000.ORG

Hi guys, I recorded a video on how to replace manual cam chain tensioners without removing the cam covers. Please feel free to share in this group.

youtube.com/watch?v=4wDEAnw2cys

Enjoy!!!!

Hi guys!!
I just got my vtr going recently and was looking for this information. My understanding of sequence now is,
1 Adjust idle, it may cut out but close enough is ok.
2 Adjust schronisation screw to balance carbs.
3 Adjust tps to 500 ohms.
Should be good after this.

:beer: Time to celebrate 🥂 So this was the order of process I went through!! Removed airfilter box and opened up the tps wiring along with the fan wiring. Found two parts of the fan wiring had rubbed through to the chassis. Repaired these and insulated again. While this was all out I checked re ...

Hi Chris,

Great, thanks. I'll find out how to test it and go through some of the wiring. I'm hoping to find it rubbed through somewhere and shorting to the chassis or each other. I'll post back and show my results.

Thanks for the replys guys, I load tested the battery and it's holding full voltage. I took it off charge yesterday with full volts. I think the battery is fine. Not to sure about the valves as it was running before ok. The only thing I can think of is just after I bought it I was adjusting the idle ...

:confused Hi everyone,. I have a 98 vtr and bought it to fix up. Little did I know how much fixing. Anyway I cleaned the carbs and made a few repairs to the acv which was damaged and fit some new seals. I put a jet kit in along with a high performance filter to match the yoshi exhaust. Put it back ...