VTR1000.ORG

Hi all Earlier this year I picked up a Champion Oil Filter from Halfords for my Storm, Champion Code F306 or so the book said it was, as I am about to change the oil etc, I thought I would check that I had the right one as I have a few different oil filters in the garage from my cars etc. Anyway it ...

Thanks Chris and Mike for the replies, what I was worried about first of all was if they were there for some supporting of the rear part of the seat but closer inspection it appears they are not, I don't intend to carry pillions anyway, this is my bike my space, lol

Mark

Hi all, I have read somewhere that the hooks under the seat are not really needed and if you remove them its easier to get the seat on and off, is this True ?

Its the ones that are by the centre strap where the seat cowl fits.

Thanks in advance

Mark

Hi all,

To add to what Geordie has asked about, is there a stock setting the idle, mixture screws should be set to etc,

Mark

The joins from the migs to the collector pipes are a slip joint as mike says, its from the collector to the down pipe at the rear cylinder that has the gasket, pretty much the same as my original cans had.

Mark

Hi Guys, sorry for the late reply, didnt get an email, lol Anyway the old gasket was shot, the clamp had broke aswell so down to Fowlers today and picked up a new gasket, cleaned up the joints and collector pipe refitted all ok, then proceeded onto to remounting the MIG High Level cans which was wha...

Hi mate, thanks for the advice, I did have Blue Flame twin ports on it and it was running rough with the K&N so thats why I thought I would try the stock air filter with the MIG's which do sound very nice indeed until I have the spare cash for a Dyno Kit, at the moment work is slow and my 16yr o...

Hi chap, I have took the cheaper option at the mo due to cashflow so I have purchased a Stock filter from Fowlers for £24 ish, just so I won't put a hole in the piston etc, then will look at Dynojet kit etc later on.

Thanks
Mark

Hi all, Just realised that my storm has a K&N Air Filter fitted and I am putting on a pair of MIG High Level cans, so I am going to need to do something sharpish. Do I stick a Honda Air Filter in there instead or should I fit a Dyno Jet kit or is a Factory Pro Kit available in this country ? Tha...

Thanks guys, will call George White and Fowlers tomorrow

Mark

Hi all,

Having fitted my MIG High Level cans I now find that the gasket is shot on the rear downpipe to the link pipe, are they readliy available anyone know what I need to ask for at Honda ?

Thanks

Mark

Mike, Cool, thanks for that, looks like I should be ok then, less money to spend more to spend on tarting it up, lol

Mark

Thanks for the advice Kitch, can't wait for the new Battery I have brought to full charge so I can try em.

Mark

Mike so the one I have is ok or are you saying thats the one that tried to incerate your butt.

Mark

Hi all After reading about the R/R problems on the storm I thought while I had the seat covers off etc for exhaust fitting, I would check mine out. To my surprise it appears to have been done, a quick google says its for a CBR900 etc, will this be ok ? http://www.youcanavit.com/myimages/reg1.jpg htt...