Stripping Custurd

Moderator: VTRDark

Post Reply
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Stripping Custurd

Post by MacV2 »

So the strip down has started...

Yes I should have got better pics & will on request... :lol:
Cus Bits 5.JPG
Most bits avaliable but some damaged see here...

viewtopic.php?p=492965#p492965

So to start off...
Cus Bits 2.JPG
Air box, not geuine sub filters, Hi-Flo fillter bit grubby but useable, both Stacks No lid screws ! £40 posted.

Set of carbs, could do with a good clean externally but were running fine when last ridden... £50 posted.

Heat shield, inc the small side bit & all 3 panel clips... £15 posted.


Cus Bits 4.JPG
Choke cable, needs a good lube but choke nuts & knulred nut both ok. £12 posted

Throttle housing, tube & pull cable. Grip is damaged. £12 posted

Reg/Rec finned unknown make shunt type £12 posted

CDI box £12 posted

Converter CDI (Spark Box ?) £12 posted

Starter relay £12 posted.

Seat latch with one key £15 posted. SOLD


Cus Bits 6.JPG
Fule cap & ignition 3 keys ( seat latch is diffrent key) Ignition will be with top yoke £25 posted. SOLD

Free VTR1000 key fob to first purchaser...

All Items come with free Frank webs & may even contain some of his offspring... :lol:

All items cost posted to UK mailand only happy to send further afield extra postage cost may be involed.

Happy to take an offer for the lot or mutiple items.
You do not have the required permissions to view the files attached to this post.
Last edited by MacV2 on Wed Oct 13, 2021 7:05 pm, edited 2 times in total.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Fairings have gone...

Post by MacV2 »

Fairings & tank picked up today... Bonus I sold the guy a set of indidas well !
Cust 201.JPG
Cust 202.JPG
Cust 203.JPG
Cust 204.JPG
Cust 206.JPG
All the body work is cracked, scuffed tank bacly dented...

But It's all free if anyone wants it... Collectted today GONE to a good home I think ... :lol: :lol:
You do not have the required permissions to view the files attached to this post.
Last edited by MacV2 on Mon Oct 11, 2021 1:26 pm, edited 3 times in total.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Air box, not geuine sub filters, Hi-Flo fillter bit grubby but useable, both Stacks No lid screws ! £40 posted.
Cust 209.JPG
Cust 210.JPG
Cust 211.JPG
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

SOLD...Set of carbs,
Cust 212.JPG
Cust 213.JPG
Cust 214.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by MacV2 on Tue Oct 12, 2021 10:24 am, edited 1 time in total.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Choke cable, needs a good lube but choke nuts & knulred nut both ok. £12 posted

Throttle housing, tube & pull cable. Grip is damaged. £12 posted

Reg/Rec finned unknown make shunt type £12 posted

CDI box £12 posted

Converter CDI (Spark Box ?) £12 posted

Starter relay £12 posted.

Not in pic but ignition is avaliable with the fule cap same key...
Fule cap & ignition 3 keys ( seat latch is diffrent key) Ignition will be with top yoke £25 posted. SOLD


Seat latch with one key £15 posted.SOLD
Cust 216.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by MacV2 on Wed Oct 13, 2021 7:06 pm, edited 2 times in total.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Std undertray, has front of batt box but no lid.

Cut down Number plate end.
Cust 207.JPG
Cust 208.JPG

£20 posted UK mainland...happy to send further afield extra postage cost may be involed.
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Set of Rads, bit crusty TBH but no leaks when last in use...

£30 for both as is.

Happy to split left or right.
Cust 222.JPG
Cust 223.JPG

Thermostat...£30 posted
Cust 224.JPG


Offers accepted, happy to send further afield extra postage cost may be involed.
You do not have the required permissions to view the files attached to this post.
Last edited by MacV2 on Fri Oct 08, 2021 3:57 pm, edited 1 time in total.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Sprocket carrier, could do with a bit more cleaning.

Bit of a lump so postage around £7..?

So £25 posted.
Cust 219.JPG
Cust 220.JPG
I have a fairly decent used rear sprocket Std 41 tooth...
Cust 217.JPG
Cust 218.JPG
Do for a spare wheel on trackday bike maybe ?

£10 posted.

Items cost posted to UK mailand only happy to send further afield extra postage cost may be involed.
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Set of fairing brackets c/w bolts.

£15 posted.
Cust 225.JPG
Items cost posted to UK mailand only happy to send further afield extra postage cost may be involed.
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Cust 221.JPG
Side stand switch...

£10 posted.

items cost posted to UK mailand only happy to send further afield extra postage cost may be involed.
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Set of coils...

£15 posted...
Cust 226.JPG
Items cost posted to UK mailand only happy to send further afield extra postage cost may be involed.
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
sirch345
Site Admin
Posts: 21669
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: Stripping Custurd

Post by sirch345 »

That's much better Mac :clap:

Chris.
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd Top yoke... SOLD

Post by MacV2 »

SOLD.

Nice clean top yoke...Not scratched to buggery by a big buch of keys...
Cust 229.JPG
SOLD.
You do not have the required permissions to view the files attached to this post.
Last edited by MacV2 on Wed Oct 13, 2021 9:06 am, edited 1 time in total.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd Front callipers...

Post by MacV2 »

Pair front callipers lines & Std Storm M/C
Need pads.


£100 posted UK mainland happy to ship futher afield but extra postage cost may be required.. Open to offers...
CUST 301.JPG
Cust 302.JPG
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17418
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Stripping Custurd

Post by MacV2 »

Sold the forks so as I had to get them off the rest of it got stripped down...
CUST LAST RITES.JPG
CLR 1.JPG
Have the front wheel as well both wheels have old tyres on & can be sold with or without discs, carrier, spindles/spacers.
CLR 2.JPG
Various other bits.

All for sale & I'm open to offers on any part.

Have intrest on r/h front hanger & front subframe other than that it's all up for grabs...
You do not have the required permissions to view the files attached to this post.
Making up since 2007, sometimes it's true...Honest...
Post Reply