WORKSHOP DAY.

[tony.mon]

Big one's a #2 centre punch, with 4lb hammer, in my experience.

[LutonStorm]

Well i'm pleased to say that no metal was harmed during the making of the hole...

Thanks for the info, a Nr.6 and Nr.10 allen wrench did the job and opened the covers nicely!

I'll get the CCTs ordered...

[Pantaloonie]

Yup, I'd set aside a couple of hours this morning to remove the inspection covers, but they undid fine on the first attempt, so I have 1hr 59mins spare now...
So that's done, the brass carb take-offs and hoses are ordered, and Bazza has some cct's for me - Bazza, are these your modified originals I've been reading about?
Anything else I've forgotten? Apart from golf tees, off to ebay now for a pack.
Dave.


edit - Tony, i did reply to your pm (just to say thanks) but it's sitting stubbornly in the pm outbox so i assume it hasn't been sent.

[tony.mon]

edit - Tony, i did reply to your pm (just to say thanks) but it's sitting stubbornly in the pm outbox so i assume it hasn't been sent.

Got message, thanks.
They stay in your outbox until they're read.

[bazza696]

Yup, I'd set aside a couple of hours this morning to remove the inspection covers, but they undid fine on the first attempt, so I have 1hr 59mins spare now...
So that's done, the brass carb take-offs and hoses are ordered, and Bazza has some cct's for me - Bazza, are these your modified originals I've been reading about?
Anything else I've forgotten? Apart from golf tees, off to ebay now for a pack.
Dave.


edit - Tony, i did reply to your pm (just to say thanks) but it's sitting stubbornly in the pm outbox so i assume it hasn't been sent.

Yes they are moded Honda automatics.

Need a few cct keys for locking off.

[Styler4077]

Any one got the part number of these brass tees ??? from the http://www.flowtech.co.uk web site?
Will any one have spares to buy at the workshop day?
Do they also do the tube?
Golf tee's I'll nick from the kids golf bag, be nice for some thing to come the other way

Looking forward to the second workshop day.

Stephen

[benny hedges]

ah, maybe that was a bad link to give you as it's a trade shop.
i have an account with them and use them a lot so get stuff for peanuts...

try this place instead m8, theyre fair priced and next day delivery.
http://www.cbsonline.co.uk/hoses-11-c.asp

[Jazzscot]

Which brass thing would I order for extending the take off points????

Jazz

[tony.mon]

Which brass thing would I order for extending the take off points????

Jazz

http://www.carbtune.com/

Look in accessories

You need two of the 5mm ones.

[Styler4077]

Got the carbtune parts ordered today and the CCT's are on the way.

Ready to learn some more.

[Jonesey]

I also have a compression testing guage, Tony, what time does the kettle first boil?

[bazza696]

I also have a compression testing guage, Tony, what time does the kettle first boil?

10am the start, so do you want to meet me at boreham BP for a refill at 9am, then have a burn to Tony's

[Jonesey]

Sounds good to me Bazzzzzzzzzzzzzzzzzzzzzzzzzza

[tony.mon]

I also have a compression testing guage, Tony, what time does the kettle first boil?

Got one of those boil-when-you-need-it kettles by Tefal, so ready when you are. Any time from 9 onwards.

SWMBO is a serial tea-drinker, so bought her one of these- now she's never more than four seconds away from a refill

[rumpleforeskin]

ah yes, the tefal quick cup. Weapon of choice for the hardened tea addict