bolts n stuff

[agentpineapple]

advice needed ladies and gents
i'm trying to replace certain items on my bike back to original spec, just little things like bolts and washers and such.
i'm looking at buying a pair off rubber washer/grommet thingys that sit at the front of the petrol tank under the mounting bolts, if looked at lings honda and including shipping its £10.33 , that just feels like i'm being
i also need 8x air box lid screws, i don't have any on my bike(bolts instead, just ask carl ) scrub this one, i found a place on ebay where i can buy 100(i only need 8 tho ) for £5.28, lings wanted 61p per screw....
and finally does anyone know the size of the bolt, tank hinge at the back of the tank, i have got a set of verniers to get an accurate measurement

[Wicky]

IIRC 10mm nut on the long hinge bolt at the rear of the tank - so what goes through there now holding your tank on? or do you clamp your legs tight on the tank to stop it falling off (;

[VTRDark]

so what goes through there now holding your tank on?

There's a bolt and 10mm nut as it should be on there at the mo , so I don't know what the problem is there.

And yes Marty change those allen bolts in you airbox lid, it's a pain everytime I go and grab my screwdriver out of habit, it takes twice as long to remove them, and they are not magnetic.

Your bike is so abnormal.

(:-})

[Vtrkidda]

Bsm pm me your address again ive got a full box of engine ,brake ect....screws bolts you can have as my storm has the pro bolt full monty kit on it no air box screw though if you want send there free

[agentpineapple]

Bsm pm me your address again ive got a full box of engine ,brake ect....screws bolts you can have as my storm has the pro bolt full monty kit on it no air box screw though if you want send there free

cheers kidda thats very kind of you buddy
you will have a pm very shortly

[VTRDark]

full box of engine ,brake ect....screws bolts you can have as my storm has the pro bolt full monty kit on it

If you have a top fairing mounting bolt in there. the shorter type with the flange on it that goes on the top of fairing near the rad. Can you chuck one in with Marty's bits please mate. I lost mine the other day.

(:-})

[agentpineapple]

full box of engine ,brake ect....screws bolts you can have as my storm has the pro bolt full monty kit on it

If you have a top fairing mounting bolt in there. the shorter type with the flange on it that goes on the top of fairing near the rad. Can you chuck one in with Marty's bits please mate. I lost mine the other day.

(:-})

that will be a fiver please carl.........
thats cheaper than david silvers

[VTRDark]

that will be a fiver please carl.........

What's that, handling fees. You Black cab drivers are worse than Royal mail.

(:-})

[agentpineapple]

that will be a fiver please carl.........

What's that, handling fees. You Black cab drivers are worse than Royal mail.

(:-})

i've probably got one knocking around carl, have a look at my NUTS n bolts tomorrow
i've also got a headlight surround iirc your after one....

[tony.mon]

Headlight surround?
I've been keeping an eye out for a spare one to spray white.
Might sort a swap for those cam covers, and the rental on the swing arm

[agentpineapple]

Headlight surround?
I've been keeping an eye out for a spare one to spray white.
Might sort a swap for those cam covers, and the rental on the swing arm

i've got a couple spare tony, no probs.
this one is silver underneath, but it will need respraying.....



sounds like a deal for the bits you've supplied me.....

[tony.mon]

Go on then.
I might leave the sticky back plastic on and just get a Blue Peter decal made up for it.

[agentpineapple]

Go on then.
I might leave the sticky back plastic on and just get a Blue Peter decal made up for it.

are you in a rush mate, or can you wait until i get back from spain.....

[tony.mon]

Am I in a rush?

How long have you had my SA?

No, no rush, Marty

But I want it in black fake carbon, not the pink version, or people will start talking.
But not to me.

[agentpineapple]

when i get back from spain i'll buy some normal colour c/f wrap and do it for you matey, as for the s/a do you want the time period of the loan in, days/weeks/months or years
i'm back on the 19th of july, so i'll crack on with it then
i've now taken off the colour change vinyl wrap, its been rubbed down and painted tough satin black, ready to be covered in black c/f wrap when i return from my travels

yours ready for wrapping



and mine ready to fit(minus the side light....oops )