rev limiter soft mod....

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
User avatar
benny hedges
Posts: 6110
Joined: Sun Oct 18, 2009 5:09 pm
Location: Warrington

rev limiter soft mod....

Post by benny hedges »

saw this interesting mod for the sp's...

http://www.rc51.org/b2a15.htm

wondering whether the same mod will work on the storm....
anyone done this - or know which wires to bridge? :think:
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
User avatar
seb421
Posts: 4840
Joined: Fri Mar 06, 2009 1:06 am
Location: Bolton Lancs

Re: rev limiter soft mod....

Post by seb421 »

what does it do mate? take the limiter off or stop it bouncing or what ever you call it when pinned on the limit
ヨシムラ

MOT - 10/04/2015
TAX - 30/11/14
INSURANCE - MCE - Expires 12/04/2015 (Midnight)
ACCIDENT CALL - 0871 2227910
RAC - 0800 1977830 - 03_MCECAB90013033
User avatar
benny hedges
Posts: 6110
Joined: Sun Oct 18, 2009 5:09 pm
Location: Warrington

Re: rev limiter soft mod....

Post by benny hedges »

seb421 wrote:stop it bouncing or what ever you call it when pinned on the limit
^ that.

best used with a modded spring set imo... but like with mine, it wnts to rev right up there so the limiter is a pain.
you will hit a point where there isnt enough air available for it to rev higher.... im pretty sure the oem rev limit is a bit over cautious.
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
tony.mon
Posts: 16288
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: rev limiter soft mod....

Post by tony.mon »

Agreed- the std cams aren't a limit; the airbox and intake flow is.

If you have modified cams you can use a little overrev, but apart from saving you a gearchange on the dragstrip or possibly on a trackday it isn't much use; you want to change into a rev number which will give you torque and horsepower to pull you through another gear, so over-revving and then changing up into the point where you're almost out of revs again doesn't help much.

I'd guess that these motors can reliably over-rev to 1000 more than they normally do, but unless you've done some fairly radical head/airbox/cam work they won't be in a useful power range at that point.

Have a look at the way hp and torque drop off just before the rev limiter on pretty much all dyno charts.....
They just run out of puff. That's why the stage 2 and 3 bikes hang on to peak hp and torque doesn't lose much either. A bit more air and fuel, plus ram-air helps hugely in getting more combustible gasses into the combustion chambers at high revs.

Don't let me stop you trying, though.... :clap:
It's not falling off, it's an upgrade opportunity.
User avatar
geodude
Posts: 3368
Joined: Thu Apr 23, 2009 9:15 pm
Location: Southampton, Hampshire
Contact:

Re: rev limiter soft mod....

Post by geodude »

For me its

Redline threshold (engine off only)
Press C, release, and press again
Release C when desired RPM is reached

:P :P :P :P
“Only by constantly developing your insight and knowledge can you fulfil your responsibility to ride safely and effectively”
“He who rides fastest, rides alone!"
Image
YouTube Website Facebook Bike accessories
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: rev limiter soft mod....

Post by Griff1977 »

Show off!! :cool2
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
User avatar
benny hedges
Posts: 6110
Joined: Sun Oct 18, 2009 5:09 pm
Location: Warrington

Re: rev limiter soft mod....

Post by benny hedges »

Griff1977 wrote:Show off!! :cool2
SHHH :shh: dont tell him, but when were on the next op storm we'll reset his limiter to 20k and superglue his throttle open so he can have bent valves to reminisc of the good old firestorm days :shh:
You do not have to say anything. But it may harm your defence if you do not mention when posting something which you later rely on in quote. Anything you do say may be ripped to sh*t.
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: rev limiter soft mod....

Post by lloydie »

No lets set it to 2k that way we'll be able to keep up !!
Post Reply