Newbie!!!!!
Newbie!!!!!
Hello folks, just wanted to introduce myself as a new member of the awesome Firestorm club. I am so new that I don't actually have the bike yet! (pick it up on Wed!). I just wanted to thank the members on here, as with all the advice available I have already been warned about cct's and have ordered manual ones ready to be fitted.
I've wanted a v-twin for all of my biking life and recently came into a bit of money and the firestorm seemed the best choice by far, great looking and the best noise ever invented. I'm looking forward to many years of riding my firestorm and getting together with fellow firestorm owners for ride outs etc....
Also, does anybody know a good place to get the manual ccts' fitted in the Lincolnshire area, preferably, Grantham, Sleaford or Lincoln area?
Cheers, Matt.
P.S. I will post a pic once I collect my bike and give it a good clean and polish!
I've wanted a v-twin for all of my biking life and recently came into a bit of money and the firestorm seemed the best choice by far, great looking and the best noise ever invented. I'm looking forward to many years of riding my firestorm and getting together with fellow firestorm owners for ride outs etc....
Also, does anybody know a good place to get the manual ccts' fitted in the Lincolnshire area, preferably, Grantham, Sleaford or Lincoln area?
Cheers, Matt.
P.S. I will post a pic once I collect my bike and give it a good clean and polish!
Re: Newbie!!!!!
Hi there & welcome 

Re: Newbie!!!!!
Hi and welcome to the Forum. Rider on a Storm sells very good manual cct's. search the Workshop Section.
Theres A Hare in The Turnips.
Re: Newbie!!!!!
Welcome to the club Matt, enjoy the bike when you get it. 

Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
Re: Newbie!!!!!
Hi, Matt.
Looks like you have all of the normal problems beaten before the start; all there is to do is to ride it!
Looks like you have all of the normal problems beaten before the start; all there is to do is to ride it!
It's not falling off, it's an upgrade opportunity.
Re: Newbie!!!!!
Welcome to the forum, good luck with the bike 

Slowly approaching the more bikes than birthdays achievement
Re: Newbie!!!!!
hello mate. great bikes . you wont be disappointed 

3 out of 4 people make up 75% of the worlds population.
Re: Newbie!!!!!
Welcome aboard buddy
Hopefully someone on here will be able to help with the fitting of the ccts, although if you are even a bit mechanically minded, the guide on here is a doddle to follow
And there are plenty of guys on here to offer advice
Hopefully someone on here will be able to help with the fitting of the ccts, although if you are even a bit mechanically minded, the guide on here is a doddle to follow
And there are plenty of guys on here to offer advice
- Hairy biker
- Posts: 366
- Joined: Tue May 07, 2013 8:33 pm
- Location: Newark
Re: Newbie!!!!!
Welcome aboard, watch your speed around Lincolnshire the police seem to be coming down hard on bikes.....again! 

Of all the things I've lost I miss my mind the most
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Newbie!!!!!
welcome, I sometimes go to the lincolnshire bike nights and willingham woods on wednesdays, might see you there? does rider on a storm still supply cct's, when I was asking him for a set never replied so got a set of krieger ones
redvtr
Re: Newbie!!!!!
rider on a storm hasn't been around for a while, not sure what's happened there.
But here's a link for sources.
http://www.vtr1000.org/phpBB3/viewtopic ... hilit=ccts
(:-})

But here's a link for sources.
http://www.vtr1000.org/phpBB3/viewtopic ... hilit=ccts
(:-})
==============================Enter the Darkside
Re: Newbie!!!!!
Thanks to everyone for the warm welcome. Having looked at the instructions on here it does look like even i could manage it. I'll post some pics on wed.
Re: Newbie!!!!!
Hey
welcome to the club 

