For some reason mine is not working
Any idea what it could be
98 storm
Temp gauge not working
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Temp gauge not working
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Re: Temp gauge not working
Slowly approaching the more bikes than birthdays achievement
Re: Temp gauge not working
The way to test the gauge is to remove the push on connector @ the thermostat housing and touch it to ground (earth) and turn on the key.
The gauge should go full hot for analog or flash 270 (I believe) on a digital gauge.
One caution is don't let the gauge sit pegged. Remove to power (either turn the key off or pull the wire) as soon as it checks out as to not damage the gauge.
The gauge should go full hot for analog or flash 270 (I believe) on a digital gauge.
One caution is don't let the gauge sit pegged. Remove to power (either turn the key off or pull the wire) as soon as it checks out as to not damage the gauge.

Loud pipes don't save lives, knowing how to ride your bike will save your life.
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Temp gauge not working
have you had tha fairing off lately, you might have knocked the plug by the rhs rad?
HEY YOU GUYS!!!!!!
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: Temp gauge not working
Fitted switch because i am fed up of it not coming on till it's about half way8541Hawk wrote:The way to test the gauge is to remove the push on connector @ the thermostat housing and touch it to ground (earth) and turn on the key.
The gauge should go full hot for analog or flash 270 (I believe) on a digital gauge.
One caution is don't let the gauge sit pegged. Remove to power (either turn the key off or pull the wire) as soon as it checks out as to not damage the gauge.
After that it comes away from the peg when turned on but does not go any further then that
98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
- thumperslaw
- Posts: 1209
- Joined: Thu Nov 24, 2011 7:14 pm
- Location: oxford
Re: Temp gauge not working
Fixxed it's self now 

98 storm with goodies!
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Srad seven fiddy stuntbike
K100 "flying brick"
R.I.P engine number 5
Re: Temp gauge not working
That one controls the fan operationagentpineapple wrote:have you had tha fairing off lately, you might have knocked the plug by the rhs rad?

Loud pipes don't save lives, knowing how to ride your bike will save your life.
Re: Temp gauge not working
That helpsPossibly could have just broken?


(:-})
==============================Enter the Darkside